Search results

Do a search on Google, something like holding the trip in turning on ignition turn trip one way then turn off ignition......something like this.

I have same problem, 57 plate fr with o/s/r wheel paint blistering. Dealers said no due to small scuffle. I contacted seat customer care who agreed that if warranty issue caused damage....ie blister, then I will be covered. They are contacting dealer on Monday....fingers crossed

What is the model of the Bosch ones?? is it A099s? For a 57 Plate FR Leon

it is leather mate and so easy to fit, only 4 little screws. It was about £90 i think, looked about for cheaper one but seremotors from ireland was the cheapest. The stealers wanted over £100.

yes, from seremotors with the alu door trim, defo get the arm rest, i would not have one without it now..

Nae bother ma man!!:)

Posted an irmscher one out before which cost about £30 quid, keep your eyes open on ebay and you might find a wee deal

No bother mate, just lying there doing nowt....

Scotland, just south of Glasgow

Tom, av got one from 2007 FR, live in prestwick

Dont know where you stay mate but i have a FR 2007 Leon back box you could have which is sitting in ma hut. I live in Prestwick and took off the back box after about 15k miles.

Not so good then mate, hope you get sorted and all legal....HA

Sorry my mistake......:cry: Obviously thats why the back of the headlight is different!! Na, mine was normal headlights

I replaced the lights with non standard bulbs, (nightbreakers) from Auto bulbs direct i think it was.. internet is by far the cheapest, the rear of my headlight is only held on with two metal clips and not the 4 screws.... The clips just pull off which exposes the bulb inside which is then so...

1. Press and Hold the Odometer knob in 2. Turn the ignition on (do not start the car though) 3. Turn the odometer knob to the right and hold for about 5 secs. 4. Release odometer knob and switch ignition off. 5. Start car, Service indicator should now be gone.== Answer == I do this...

they are 26" for both drivers and passengers?? this correct?[B)]

Boolandy, I have a custom 6"x4" stainless steel back box on my 2007 Leon FR TDi and caused no problems. The guy had to cut and weld pipes on to get it to join, the old rear silencer was massive compared to my little box (similar in size to a 2 litre juice bottle), it gives off a nice wee...

was paul mate, good value for money

got it remapped last week and is like a new motor now

Awrite, He fitted ma exhaust so he did, found out who was doing all the mod cons at bickets and got in touch with him and he fitted ma back box. He seemed to spend a lot of time and money in Bickets.....:)