Search results

Been thinking of getting one of these for a while, reckon it'll hold out on a KO3s? And i'd like to see some vids of it :)

Here's mine, has a 3' Tip now though :)

Not too hard, i've ordered all the bits i need to make a 3" one. Search for Robbie C's thread, he's made his own and lists all the parts he used which is helpful :) The black thing coming off the TIP is the N75 valve which controls boost, i think you can ge around it by using a MBC/ EBC. You...

Checked the engine bay today and removed the PCV system, but whilst doing so i found a plug that come out of the left hand side of the injector rail, but i cannot find anywhere to plug it into. Went all over the charge pipes looking for leaks and they all seem ok and i only replaced the line...

Do you think? That could be an explanation. Took if for a few drives, it's eating its way through fuel. It seems to be fine in the lower range of the revs, up until about 4k then it starts to bog down and judder on boost. Also vag-com'd it yesterday and i have; Camshaft postion sensor (G40) -...

Hi Recently took my car off the road and fitted a KO3s and an intercooler. But i'm having a problem with boost. When i give it some, i can hear it spool up, boost gauge reads about 10psi, then will shoot up to 20ish psi, but the car will not pull at all. I've done a search but all i found...

Hi Recently took my car off the road and fitted a KO3s and an intercooler. But i'm having a problem with boost. When i give it some, i can hear it spool up, boost gauge reads about 10psi, then will shoot up to 20ish psi, but the car will not pull at all. I've done a search but all i found...

Hi all, Been searching everywhere for a part number for this, does anyone know it at all? I hope i can buy the housing and not the whole thing as they are quite pricey. Cheers.

Bought one 2 months ago from an Audi dealers, cost me £27 :) also fitted the short shifter from eBay so its nice and short :)

Because the battery is in the boot so i thought i'd run an inline fuse just to be safe. Is there no need?

Hi guys, I've relocated my battery to the boot, using 4 gauge wire and a 80A fuse, and it's popped it? What amp fuse would i need to make sure it doesn't keep popping? Also, i've just bought a Autometer Air/ fuel ratio gauge, can anyone tell me which colour the o2 sensor + is on the...

I have a Turborevs downpipe and it barely fits; sits wayy to close to the shifter box/ firewall, and the welds where shocking. I eventually got it fitting right, still quite close to the firewall. noticed a slight power gain in the upper revs.

Not really man, just split the power and extend all the MFA sensor wires and wires to the screen :D

Well it's come to that stage in any mans (Or womans, i'm not sexist) life where work gives you a payrise and finially you can start spending moneyz on your motor So firstly, headunit install: It's not sitting exactly how i'd like it, and has just been left like it is at the moment. In...

I've heard some bad things about super 4's, like there's too many points of contact and sometimes it can't find a clean spark because of it. I only read that somewhere so I guess someone will call BS hah!

Funnily enough i fitted my uni eBay one today, the 1.2L One, it's pretty good to be honest :)

Old but i love it :)

You running a standard TIP? Could be the TIP Collapsing on itself...

You know you have a mk2 Ibiza when you give her a pat every time you walk past it to your mk3 Or You know you have a mk2 Ibiza when your phone background is still your mk2, even though you have a mk3 :)

Yeah, that ECU fault could be the one. I have a map and Vagcom doesn't display defective ECU warning at all :S