Hello people, I’m after some info/help again. I’m working my way through my Ibiza issues and noticed a few problems. I’m getting done fault codes for boost sensor (16621 boost pressure sensor signal too low) and 1640 (air pressure sensor/intake pressure sensor signal) anyway the boost sensor...
Got it sorted! Someone had snapped the pipe on n249 at the side for the dump/diverter valve. Thankfully he left it in the boot so Repaired pipe and working A ok now! Just need to shorten the crazy big looped pipe! Doesn’t need to be that long! Yeah it’s not gonna be an easy task to get it mint...
Thanks for your time and help! Looks like to make way for boost pipe they have removed vacuum reservoir and snapped off pipe at n249 that goes to dump/diverter valve so yeah found the issues with your help thanks again
This might be a better picture! If anyone has a picture of theirs (I know most guys delete it and run it straight from inlet) I would like to see where it’s meant to go
Hello, I have recently bought back my Ibiza and it had been badly messed around with. Due to needing urgent work I haven’t driven it yet. Anyway I noticed that dump valve is missing it’s vacuum hose and it looks like it has been looped back into Solenoid valve (might be wrong but looks like N75)...
Happy new year! I fitted my clutch cable yesterday and it feels better and it has a uniform feel from top to bottom so happy days. Once I get car on it’s feet I will be able to tell them. One last question I fitted a new rubber grommet which goes onto clutch arm and I got a new retainer for...
Sorry for late reply! Thanks for all your info once the weather is better I will change cable and see how it goes! From memory it’s stiff all the way down so hopefully just cable, car has sat about for a good while
Evening all, I’m rebuilding an old 2.0 8v gti cupra sport. When I got it the pedal box was snapped badly. I got it welded and strengthened and found pedal really stiff. I bought a genuine seat clutch cable but before I fit i have a few questions.
Is this most likely the cause of stiff clutch...
Thanks for the reply. I sorted it earlier on with a new set of ht leads. Now no misfire at all! Just got to fix all the other problems like shot rear calipers( It did sit for 18 months) blowing exhaust, broken coil spring and new passengers front abs sensor and wiring repair!
Hello gents, been away for a while as I sold my mk3 20vt. Anyway I got this little beauty for £220. I had to tow it away from the seller as a non start.he told me he changed the dizzy cap and it wouldn't start. I got old dizzy cap off him fitted it and it fired up and cut out, after some...
Hi mate, that fault code rings a bell. I think I had this when I changed my coil pack with a non seat/vw, the car ran fine just gave me a fault code on my fault code reader. Have you had any coil packs changed lately? You could swap the coil from cylinder 1 to another cylinder and see if the...
Sorry mate no pictures, I cut the the top of the link (plastic part) so that you could see the ball joint when the linkage is pushed into place. I drilled a hole through the accessible part and split pinned it. It's been fine ever since and that was 18 months ago
Hello when I first got my Ibiza it had tight gears ie would return to the middle/neutral position and sometimes would not go into 2nd of 5th without some extra push I did lubricate the hell out of gear stick ball setup inside car and selector on top of box but it did not help recently it has got...
Good guide I was wondering what other pipe work I need I have 2x 90 1x 45 degree silicone hoses in 57mm Id I have the metal pipe work but I was wondering what size and stuff are the last 2 hoses that go onto the hard plastic pipes that the old intercooler came off are they 135degree and stil 57 id?
Hey all just got my hands on a fmic same one that the guy is selling as a kit cause I only git the cooler I need the pips and rubber hoses by the looks of things I need 2 90 degree silicone hose 2 45 degree bends and a couple of straight pipes.does anyone know the exact ones I need? :shrug:
Ah ok then I wasn't sure what cell a standard cat was I heard the 100 cell cats had to be proper hot to pass an mot but if yours passed then I'm tempted
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.