Search results

We have had issues with these, 1.8t pump conversion is easy to do and well worth while. Holds better oil pressure also. 2 issues you can get 1 ) the pickups get clogged up, this is usually due to poor servicing and will generally not show itself before seizing the cam. 2) the balance assembly...

Diff shimming Often shimming doesen't need touching but it must be checked on the 02m often a smaller shim is required with new bearings. This is based on fitting quaife's and we have done many. Glad your pleased with yours wild willy.

fuel Hi what your dyno guys are saying is right the fuelling will increase to keep the cylinders and EGT's cooler. What age is your leon? what you are seeing is actual and requested lambda, if that is a mapped car then they haven't touched your fuel map as 225's stock run .95 fuel, which anyone...

graph What I mean with regard to the fuelling on the logs I have seen (maybe you would like to send them and we will take a look closer for you) is the fuelling the ecu is requesting hence what the map is asking for is being met by the ecu in the actual lambda figure. If your injector duty...

fuel The ecu will only meet the lambda target the ecu is requesting though or regulate to as near as it can? If you think you have a problem with fuel it would be worth logging your injector duty cycle to check it is not to high.

logs Why are you thinking you have a problem with fuel ? from your logs your car appears to be meeting it's lambda target?

16 v manifolds Hi, As said previously we could make them but had a check and to make them for a sensible price we would need to make 10 at a time so would need a min of 5 confirmed orders. They would then cost around £300. Pics of the mk2 ones we made are on club gti.

manifold That's cool we can do this no problem but as said we would need some definite buyers before investing time and money into building these and stocking them so see how many people you can drum up and we will work something out.

Manifold Hi everyone if we had a ibiza to borrow we are sure we could adapt either our kr 16v manifold or abf mk2 manifold to fit the ibiza. The difficult part will be putting a flexible flange that can bolt up to the cat. As said in the e-mail to make production parts we would need to order a...

kENS POWER FIGURE Ken take your car to JKM and prove your power as you seen on the weekend most cars that are standard power made standard power apart from a few which are known to make over anyway, in fact a lot of 1.8t's were down. I personally feel your car is making the power you can feel a...