Search results

  1. cuprawill

    Intercooler pipework?

    The port sizes are 8mm and 25mm Sent from my HTC One using Tapatalk
  2. cuprawill

    Intercooler pipework?

    Universal kit of eBay and make one up to suit and weld on some ports for n75 and dv Sent from my HTC One using Tapatalk
  3. cuprawill

    **Breaking** 418.5bhp (Parts list pg24) Joe's (GT3071R) Ibiza Cupra R

    Hi Will, you shouldn't have got rid of the old one ;) Biggest mistake I made had a few cars since and nothing compared to the fun of that. Worst thing is I had the chance to buy it back a lot cheaper than I sold it. Really wish I did now Sent from my HTC One using Tapatalk 2
  4. cuprawill

    **Breaking** 418.5bhp (Parts list pg24) Joe's (GT3071R) Ibiza Cupra R

    Nice to see you still got this and still spending time on it hope all is well. Really tempted to get another now Sent from my HTC One using Tapatalk 2
  5. cuprawill

    Front mount paranoia

    If its the eBay one check where the pipe meets the standard pipe work. Had a lot of trouble with this one on mine
  6. cuprawill

    smoke from under bonnet

    As for the smoke from the stalk. I had the same the contacts go in the wiper stalk not an uncommon fault. Ring up Dave at sere motors a new one cost £50 for the slip ring and both stalks
  7. cuprawill

    Do MG ZR 16" Hairpin alloys fit over cupra R brembos

    Iirc the center bore is too small anyway.
  8. cuprawill

    Share some pictures of all your wheels please.

    This was my old one. Want it back :(
  9. cuprawill

    Best place for yh it'd and 380cc injectors

    2nd badger 5 top bloke and he worked with cr developing the hybrids. Also he's the bloke for mapping
  10. cuprawill

    20vt Engine Conversion..

    As per Tom. Find a crashed one. Brakes are often over looked but very important! I ran brembo's on my Cupra. One of the best mods I did.
  11. cuprawill

    Anyone running KW coilovers??

    I ran v2 and I've got to say they were amazing. Used to run ********* before that. What a difference
  12. cuprawill

    Goodridge Hoses for Ibiza Cupra R

    I bought a brembo set up s/h to fit my mk3 at the time. They came off a mk3 but the hoses I got were a different thread and too short. But I'm sure they had a 90deg fitting. Went to bill in the end and he sent the right ones no problem.
  13. cuprawill

    mk3 rad will golf fit?

    No just Ibiza ones fit
  14. cuprawill

    Well I've only gone and bought "turboboy" old Cupra

    Judging by the plate it's an old rockingham track car. Looks nice tho :)
  15. cuprawill

    What coilovers would you recommend?

    Depends on what you intend to use the car for. I had kw var2 and they were amazing. But not cheap. Weitec coilovers are a good price comfy kit.
  16. cuprawill

    seat airbags>?!

    You don't have to put it in as a mk4 golf. Just plug it in go to airbags there is a list somewhere of which one is which. Then you just set the value to 0 save and it's off. Did this on mine as I had buckets and harnesses. Was only left with the passenger Front airbag lol
  17. cuprawill

    cars forgotten how to be a car

    I had the same when my starter motor was sticking. Quick test try hitting the starter motor whilst you turn the key.
  18. cuprawill

    My cars fixed

    Yea as above it's only worth what someone is willing to pay. But they are going for very little money. Big shame as they fall into the wrong hands then. I got 3600 for mine about 2 months ago. But I was lucky I found someone willing to pay that.
  19. cuprawill

    Roll Cage Picture Request

    Glad to see it put to use. U managed to get it back ok lol. You going to be using front door cards? When I mock fitted in mine it hit on the d/c
  20. cuprawill

    CD Multichanger

    Mine did this Dow a few weeks then fixed it self
Progressive Parts, performance parts and tuning specialists