Search results

  1. IbanezDan51

    20Vt 4motion

    Because knowone would give me 8grand for a mk4 golf that doesnt run. It went bang again and I can't be bothered to rebuild the head and buy a new piston as I have my eyes on a new project with a more reliable engine than the 1.8t. Dan
  2. IbanezDan51

    20Vt 4motion

    Throughout UKmkivs and edition and R32 oc bud: http://uk-mkivs.net/forums/t/424646.aspx http://uk-mkivs.net/forums/t/424650.aspx
  3. IbanezDan51

    20Vt 4motion

    I am now breaking this Golf. Has a big turbo set up (GT2871r, top mount manifold, massive brakes etc....see ukmkivs and elsewhere for parts!)
  4. IbanezDan51

    20Vt 4motion

    http://uk-mkivs.net/forums/t/302090.aspx?PageIndex=49 Top of the thread! :)
  5. IbanezDan51

    20Vt 4motion

    Infact its because it wont let me post anything relating to the word R.T.E.C.H
  6. IbanezDan51

    20Vt 4motion

    http://s653.photobucket.com/home/******-rr-graphs/index
  7. IbanezDan51

    20Vt 4motion

    Thats because no matter how hard I try this forum wont let me post long hyperlinks without shortening the stupid things
  8. IbanezDan51

    ibiza cupra ko4 hybrid project

    SO hows it looking?!
  9. IbanezDan51

    20Vt 4motion

    I quote from Nik on a couple other forums! "Some more pics and vids Young Girl Racer Gower xxx Stock head with raised rpm limiter so we had to opt for a luck number in place of uprated valves... 7777rpm Induced sideways launch...
  10. IbanezDan51

    ibiza cupra ko4 hybrid project

    This will be awesome mate! Didnt realise you had only had the car such a short period, should make mince meat out of alot of cars! :D
  11. IbanezDan51

    20Vt 4motion

    And that with one of these! Currently no ignition advance at top end and running less boost than I can! 20psi and slow comes up to 23 at high RPM! Dan
  12. IbanezDan51

    20Vt 4motion

    It was raining when I did that, and I have cheap nasty tyres on the front...PS3's on the back though! Steering wheel was still at 90 degrees to keep it straight lol
  13. IbanezDan51

    20Vt 4motion

    Should be low 4's in the dry
  14. IbanezDan51

    20Vt 4motion

    Autobahn and the new turbo at 20psi! http://www.youtube.com/watch?v=yjcxhNjhyys
  15. IbanezDan51

    20Vt 4motion

    Well update: Car made 316hp on actuator pressure alone (13psi Ish). Nick upped the N75 duty cycle a touch and we noticed it was running rather lean, as we drove back the lights all went off and the clocks started playing up - looks like I have a knackered alternator or a bad earth point. Will...
  16. IbanezDan51

    20Vt 4motion

    No mate, standard haldex currently. Everythings mounted up now, just need to fill up my oil, gearbox oil and coolant... One thing I HATE is how the turbo is mounted and points straigt up to the bonnet - going to twist the compressor side around but will need to mount the actuator somewhere...
  17. IbanezDan51

    Audi S3 GT3582R stroker Build (previously GT3071r)

    Is it the head thats rattling on idle? As I said, they can be about 16 teeth in but the chain will be loosish when the tensioner is compeltely wound down and it should be reasonably tight even then. Had a similar problem on a car in Nicks workshop and it was down to the chain being slightly...
  18. IbanezDan51

    Audi S3 GT3582R stroker Build (previously GT3071r)

    If you're thinking its down to the tensioner ive seen them out by a tooth before but no oil light. Did you use a new one or re-use your old one? They are prone to stretching believe it or not and that can knock it way out. Maybe get an oil pressure gauge and keep an eye on it? When my...
  19. IbanezDan51

    20Vt 4motion

    Shame I didnt video it when it was on the rollers on Sat - spat lots of flames hitting the rev limited with rapid cut lol
  20. IbanezDan51

    20Vt 4motion

    R32 discs bud. Eventually get myself some 2 piece rotors to go on but they are muchos money that I dont want to shell out until im happy with these calipers.
Nimbus hosting - Based solely in the UK.