Search results

So picked up my ‘18 Leon Cupra ST today. had a quick search but couldn’t see much in the way of interior mods. Any reasonably priced ones borrowing from the VAG range? Used to find and install loads back in the Mk1 days but it feels like there’s either not much you can do or nobody bothers?

How do After quite a few years away from Seats it looks like I may be coming back :) So what's new, who's still about from the old days? Recently got a dog so needing to move from saloon to estate and the Leon seems to be coming up top for fitting the bill. Gonna be a shock to the system on...

On my way into work this morning I discovered a spring in the drivers footwell of the LCR this morning. It's not a compression spring so don't think it's clutch related, it's about an inch thick, maybe 6 or 7 inches long and on each end is a straight section with a hook shaped bend on it...

Anyone know what the corrosion warrenty was on LCR's in 03? Just noticed a patch of bubbling coming through round the rain channel above one of the doors. No paint damage so would be a warrenty claim if it's still covered. I'm assuming it was 5 years though.

Just been idly thinking about swapping the LCR for something else ( first non-seat in about 13-14 years :think: as Seat haven't done anything that grabs me for a while ) and was just wondering if anyone had traded in an LCR recently, preferably something '03 with about 70k on the clock? I've...

OK yes I've searched, but the info I found didn't answer a few questions... So if you fit a Mk3 dash what happens to the heater controls? I assume they don't fit in the Mk3 dash as the Mk3 uses the HU for control. Does the Mk2 instrument cluster fit in the Mk3 dash? How hard is it to...

OK bit of a problem, I'm using the Cordy and it has no rear seats, but I may have to pick up my 6month old son from nursery because my wife can't get there due to the weather again. Now I can't put his seat in the passenger front due to the airbag so need to disable this. Is there anyway to...

Had the cam belt on the LCR about a month or so ago and yesterday the check engine light came on. Managed to read the codes out tonight and got 2 DTCs Found: 16396 - Cam-Timing Adj. Bank 1: Retard Setpoint Not Reached 35-00 - - 16727 - Camshaft Position Sensor (G40): Signal too...

Does anyone know which lights are in each section on a Mk3 cordy? On the Mk2 only the fog lights are on the boot, but I think the reverse lights are in the boot lights on the Mk3 but I'm after some confirmation. Pete

I know it's been posted before a long time ago, but I saw this and just thought of those words from TFATF. http://cgi.ebay.co.uk/1997-SEAT-CORDOBA-SX-BLUE_W0QQitemZ320277660037QQ Why?... Just why? :headhurt:

You know you want to mate... ;) Do it... :funk: Pete

Anyone fitted S3 seats into an LCR? Might be getting some so looking for wiring info to get them plugged into airbags and other electrics. Pete

Has anyone got the part numbers for the car side plugs required to wire in S3 air vents? I know most people cut the plugs off but I want to do it properly :D Pete

I've finally got around to uploading some of the shots I took at Thruxton. I've not processed them all, just picked a select few. For anyone interested then you will find them Here Pete

So does anyone have any recomendations for ARBs for the Cordy? Would like to get rid of that body roll :D

As not many people visit the Cordoba section I thought I'd post the link to my pics here :D http://www.seatcupra.net/forums/showpost.php?p=1501314&postcount=202 Pete

After fitting the brembos I'm thinking the pedal travel could be reduced by fitting a bigger master cylinder to my Cordoba. Is there a bigger one that I could fit easily as I like the short travel on the LCR brake pedal, be nice to get that in the cordy :D Pete

So does the Cordoba 16v have a bias valve or not? I'm only wondering as when I bled the rear brakes not much fluid came out when opening the calipers. SO wondering if the valve was causing that. It has ABS so I naver bothered looking before. Might jack the rear up again tonight and have a look...

Because I really don't think they are now, they just need a better signal... Only recently have I realised how good my "system" sounds now, and the "system" comprises nothing more than a new HU :lol: Those standard midbass's can produce plenty of bass too, almost like there's a sub in there :D

OK so I have an ebay USB cable which connects to my LCR fine, but when I try it on the '97 Cordoba 16v it pops up a dialog box with all sorts of possible faults, one of which is the k-line being stuck. So the question is where do I go from here debugging this to get vag-com working as I need to...