Search results

how far are they from leicestershire? need somethin close by :)

I basically bought a already mapped yet with no proof Leon Cupra 2003 with AUQ engine recently, only mods it had were a panel filter and scorpian cat back. I then fitted a front mount cooler, forge 007 d/v, decat, removed the N249, N112, and SAI system I then took it or tried taking it to...

cheers people

As title really. Fitted a decat, fitted a front mount intercooler, forge 007 and removed the N249 Obviously as ive played around with a lot of the boost pipework and fittings I want to make sure ive got no issues with boost leaks etc before it goes in for the custom stage 2 map Ive got...

you mean like put it inbetween the top of the bumper and the bottom of the lights to create a gap? will have a go, just dont want to damage that film so probs put maskin tape over the film i can remove after,**** design that is ! might see if i get access from underneath now ive removed most the...

Is there anyway of getting this back on without bashing, rubbing or catching the headlights? Ive jus had mine off and fitted front mount, ive removed the fogs and all the plastic from behind where the fogs would have mounted to and also the lower mounts where the bumper attaches to the slam...

ahh i see youve squashed your bottom rad hose, mines gone underneath it to prevent from doing that. just cut the fog mountings out the back of the bumper, stanley knife and heat gun, heat it up so its like butter then breeze though it with the knife, just left the mounting on where it bolts to...

yeh if u could mate underneath o the pass side where your pass side intercooler hose joins the one that comes over the engine? cheers i mean like you cant get the bumper in place to slide it on cause the headlights get in the way? and ive jus fly eyed my headlights dont want to scratch the film...

Not sure how youve routed your passenger side pipe? have u got a photo? the bottom rad hose got in the way have to force it up between that and another pipe was a real struggle, it does kind of look better the way youve done it but i couldnt get the pass side pipe to sit any lower and it was...

What i didnt know was the black hose from the throttle body stays on it! you connect the pipe with the map sensor onto that !! Got it done in 2 hours, broke my map sensor, put the drill through my air con rad, but its fitted. Just need T piece for N75 to dvalve hose, couple of jubilee clips...

The injectors are quite loud on mine sounds tappy

having this trouble with mine after fmic install.. gonna try do the bottom headlight bolts from underneath and ut the headlights on last

What im looking for really is to be told which pipe connects to what Obviously the map sensor pipe runs from left side of cooler to the throttle body Then the pipe with the connector on it goes on top of the turbo, where does the pipe with the long bracket go and where does the final bigger...

This didnt go well at all, ive put up a thread about it, basically I have 4 pipes, one goes from the throttle body down to the left connection on the intercooler, correct? this pipe has the map sensor hole in it so i know its the correct pipe. Then there is 3 other pieces which go from the top...

right ive got this in bits.. but the top pipe that goes to the back of the engine, ive got 2 connections on the pipe thats coming off th standard pipe but with my aftermarket kit theres only one connection, so where does the other go?

I thought the dumpvalve connected to the TIP pipe? im confused as hell, guess il jus have to strip it and go from there, shame nobodys done a guide, might try do one.

They dont come with one?

I saw that diagram.. but my kit only has 4 pipes...

Ive just bought one of these kits off ebay http://www.ebay.co.uk/itm/151454930047?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Im just confused with how it works or fits? I dont want to take my car to bits and then be left with a head scratcher Is there any guide or...

ive always prefered panel filters, bought a ramair jobby for £25.. opened the filter box up and theres a shiny new pipercross in there (only owned it a few weeks the car gutted lol)