Search results

I have Sachs sintered plate clutch too and DMF from LUK. It was perfect from installing, but its making whining noise now (when releasing clutch pedal)

I have Sachs sintered plate+LUK double mass flywheel for 3years now. The pedal is stiffer, but got used to it. Running 450 Nm/330 lb ft and no slipping. The only weird thing (issue) is the whining noise when releasing pedal...

Does anyone know where the green AWD Cupra is now?

Hi, mate! I had 1st issue with this intake kit. I just rasped MAF housing myself.

What Leon do You have, cause Cupra brake calipers are big and only 17" will fit (clearence is about 1cm)

Its a JE DESIGN spoiler

Does anybody know, where this beast is now?

I have welly cooler fited myself and I cut a lot of crashbar. I am considering to weld additional 90 deg plates on crashhbar "weak points"

Hi, I tried to modify my cheap armrest and it wasnt succesful and comfortable in the end. Its too high to grab gear knob comfortably. Avoid them

5w40 will decrease TFSi oil drinking and its recommended when remaping engine. Milers Nanodrive is trend in UK, but I am using Bardahl

I have Octavia vRS 17" on my 2007 Cupra. ET51

My mechanics used old bolts from OEM clutch, isnt worth?

Mine have 120k km on the clock + Stage 1 is for 30k km and it started slipping only in 4th and 5th gear. I changed OEM cluth and went for Sachs sintered+LUK DMF

Perfect!! [B)]

I have Facelift bumper and this Rockshore grill. You can see it in my avatar

I have this grill on my facelift bumper!

Buy this http://www.rockshore.uk.com/front-grille-abs-seat-leon-altea--toledo-05-on---black-279-p.asp Very good looking and price

I have Octavia vRS 17" on my 2007 Cupra and clearance is about 1cm

Thats fine! Take off engine cover, then undo 4 bolts. Wash all carbon out of throttle body and change the seal. 40 quid its ok

Look here http://www.rockshore.uk.com/front-grille-abs-seat-leon-altea--toledo-05-on---black-279-p.asp I have it in my avatar