Search results

Hey, mates! I bought used Ibiza 2007 1.4 100PS with BBZ engine from SEAT dealers. Theres 50k miles on the clock. I know that car had 1 owner and car was serviced properly Everything started after driven 50 miles - EPC and Check engine lights on and limp mode. After scanning faults and new...

Hello, everybody! I decided to take of all Twintake to wash filters and inspect ducting. Here we are :cry: this end connects to engine and its covered with oily mud (micro particles). I got this piece of s... with finger going around inner side of hose I wash filters after every 5000km, dry...

Hello mates! I will show my front conversion project. This is my car before with Xenon lights. One of headlights was broken and glued, but still there was hole under projector lens. I had problems with water condensation inside headlight. :( I got facelift Linea R bumper as You can see...

Hey, mates! I came across problem with HB4 fog bulb connector. I was to spare parts shops, searched ETKA and nothing :( Does anybody know part No for bulb connector? Here is the bulb It is for facelift Linea R fogs Part. No N 101 300 01 Thanks before!

Hi, mates! I fitted both REVO front engine mounts (dogbone will be later) and mentioned strange noise. It appears in 4th gear in range of 1k - 2,2k revs. The noise is similar to police sirren. Any ideas? (gearbox, turbo, other..)

Hey, guys! I have dilemma between 2 REVO PCV upgrade kits. and Complete oil catch can kit partly consists of PCV fix kit What are pros and cons of them if they sell them separatelly? Thanks for replies! ;)

Hi mates! I`ve got my 2.0 TFSI custom remapped and problem that appeared was rev jumping in neutral. After VCDS they said that its not a problem on software, so I changed stiffer spring in Forge DV, then to OEM and checked vacuum hoses. (problem not solved) Changed PCV to REVO PCV fix ( the...

Hey, mates! I have question about annual taxes before MOT. Theres exploitation tax in my country, that is calculated taking into account sum of 3 parameters (weight, power bhp and engines volume). This tax is constant over years, but engines power cant be constant value What is experience...

Problem appeared few weeks after installing modificated engine cover. Revs were haoticaly jumping when in neutral and engine was warm. Rev range from normal to 2k and down to 1,5k to normal. Then I removed engine cover and found the problem- vacuum hose was rubbing against engine cover...

Hi, all SCN members! I was to Repsol shop today and asked what oil do they recommend for 2.0 TFSi Cupra 2007. They answered that better will be 5w40 fully synthetic Repsol Elite Evo Then I said that mates from SCN recommend 5w30 and they replied that for our climate temperature range (-20 on...

Hey, mates! I checked oil level in my 2.0 TFSI Cupra and decided to add some 0,5 L, cause it was near "LOW" ((2k km ago I changed oil using REPSOL Elite Evolution 5W 40 )) After opening oil cap I recognised these oil deposits (like a cream, coffe+milk) Any ideas? Is this simptom of...

Hi, mates! After searching for engine cover in the web that fits with Twintake, I decided to make some plastic surgery with original one This took me few evenings with saw and paint. Results :3rd: are here http://failiem.lv/u/rcxiqhp[url]

Hi, mates! There's no info about Twintake filter flow type. Are they "0" flow filters? :confused: I recognized some dust in air duct below filters, it was a bit oily. :blink: One bike rider recommended to oil these filters after cleaning, but Forge says that filters are unoilable Any...

I bought this car 2 years ago and choosed it cause Leons are rare in my country. My Leon is 2007 2.0 TFSI (240PS). Upgrades I have made (by apperance): Forge Twintake and Diverter valve Black designed bonnet and chrome grill (yellow bonnet and chrome grill was terrible combination)...

Hi, mates. I wanted to show this problem that I came across tp prevent others. I was driving my 07 Cupra after fitting Twintake and I decided to clean those conic filters. It was catastrophe when I removed the first canister that fits to the grill, cause there was a hole in alloy pipe. This...

Hi, mates! Last week I fitted S3 intercooler on my Cupra First impessions were- fuel consuption is increased for about 0,5 litre/ 100 km.