Search results

Look at the original post. It has the part number to get from a dealer. All it is, is a gasket.

Get it looked at ASAP. Ive seen the aftermath of the tension failing, its not pretty.

Well it will help with the regens.

Eurocarparts?

Think i got mine from HID Direct.

Think they are about the same price i paid for mine. They were much better than any bulbs i used including Osrams, didnt need to use full beams often. Instructions tell you to cut a hole in the cover but you can route the cables out of the bottom by creating a 5 - 10mm gap where the cover goes on.

You can get H7r HID kits. Wont blind oncoming traffic

Think its 75w-90 if memory serves me right.

Same issue my 07 Fr had when i got rid. Tried all the different sensors for Ac unit and couldn't get it fixed.

Wont be the chain. The tensioner has become slack, I would go to dealer and get them to sort out. The longer you leave it the worse it will become and if it skips a tooth, goodbye engine.

There are 2 extra screws behind the bumper

Easier with them off. Otherwise its about 1/8 of a turn and pull out.

Looking at coming back to VAG, but with a VRS

Just my 2p from when i had 07 TDi FR with 17" alloys. Had Hankooks Ventus V12 Evo2, great grip wet or dry and low noise. However was made from chocolate and after 7k the fronts where shot. Falken ZE914. Same as the Hankooks but lasted nearly twice as long. Also tried both the AS2 and AS3's...

Lock module inside the door at fault. About £130 for part.

Top mounts are a weak spot to look at.

Think its behind and below the drivers headlight.

EML could be anything. Get the code read first as this will point to what is wrong.

They are like that from factory.

Sealey AK219 for the correct bits if you havent got any already.