Oh thank you. Surprisingly heavy then. I was under the impression they would be lighter than other 19" wheels. But then i guess they weigh basically the same as any other heavy 19"
I'm about to pick up a set of wheels that was included in the Sub8 package that was an option for the Leon Cupra, but im curious on the weight of the alloys.
Does anyone know the weight of just the 19" wheels? I've tried googling but i have not been able to find any information
2days ago i recieved a cruise control retrofit kit, i fitted the new stalk and all the wiring except the cable to the engine bay since i didnt have time at that moment.
The car worked as previous after fitting this kit.
Today i went on to remove the ECU and grind away the "cage" around the ECU...
I'm finishing up my retrofit of cruise control to my ibiza 2010 ltd.
But the last cable should be ran along the Bowden cable to the holdo and then to the ecu.
But I can't even locate where the Bowden cable exits the cabin..
How do I get a cable from the left side of the cabin into the engine...
So i recently picked up a Seat Leon FR 2008 and it has a small red light that is active near the temperature dial.
No codes present and the MFD doesnt display anything. The system has water and it keeps the temperature fine.
I've tried googling and came up with people have the light flash and...
I just picked up a Ibiza 1.4 TDI Ecomotive 2010.
However the car does not have cruise control and im wondering if someone actually have fitted it sucessfully?
I did some googling and found some guides and items on ebay, but i couldnt find a certain answer to if it was possible. Most places...
I just talked to the previous owner and he verified that it should be some coding that was done by the workshop that have been working with the car.
However it was performed some years ago so most likely the workshop will not be able to remember.
Any ideas on what it could be or how to reset...
I just picked up a track prepped Leon FR 200ps 2008.
It has the TSC/ESC light lit and the button does work.
The 01435 code is active and cant be cleared.
The previous owner had alot of work done to the car, but he didnt do it himself and then it have been sitting in his garage for the past...
I put the spring resting at the stop in the bottom rubber mount. I guess there is no other way to put it? Or did I mess it up there?
I've never fitted lowering springs before but I figured it couldn't be that hard since it's not brain surgery..
There seems to be something going on with my car.. fixing one issue and another shows up...
So I fitted eibach 15mm drop springs to my Leon Cupra st 2019 with about 13000miles on it. I have a slight clonking sound coming from the right rear corner.
I've checked that the spring is seated...
I fitted eibach springs and new superpro top mounts to my seat Leon Cupra st 2019 earlier this week.
For some reason I have a creaking sound coming from the front left shock when turning the wheel.
I have been able to visually confirm that the creaking is caused by the spring is "sticking" and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.