Search results

Haha no it wasn't the best to do, a bit of persistence and plenty of swearing got the job done!

Yeah that's what I've just done, stripped it back, pulled apart to check for damage, thankfully only one core of about 10 with damaged sheath. Repaired it and all back together with a nice thick extra layer of bike inner tube wrapped in duct tape to protect it! Was abit worried when I ran vag...

Giving my 2009 leon fr pd170 a service today and I noticed I have a damaged wiring loom looks like it rubbed against the fan i assume. Does anybody know what it's for? https://youtu.be/Tu_ubgz1v6w Thanks

Got a really annoying creaking/crunching noise when I'm heavy steering at speed coming from front driver side, had a quickly tonight, ball joints and tie rods look OK. One thing I did notice which i never have before (never really looked before now tbh) is that with the wheel off and no load on...

Right, bit of a noob question i know, but I'm removing the coil overs that where fitted to my fr170 when I bought it and going back to standard. I've got the top mount, bearing, springs and struts but i'm missing something!! What's the part called that sits between the top of the front spring...

Sorry ha, didnt mention clearly. I meant I already have a dpf delete and remap, will I notice any difference if I do EGR delete on top of this

Hey fellas, Looking to do EGR delete in near future and was wondering is there any benefit from removing the entire valve and replacing with a blank pipe between the ASV and inlet manifold over just fitting a cheap ebay blanking plate to the pipe coming from the EGR cooler? Also, I'm...

Hi all, trying to find the standard ride height for my 2009 leon fr tdi 170, chassis height near to the front and rear wheels? Bought the car already lowered, but tbh im getting sick of the ride on it so wanting to bring it back up. I also have a splitter on route and would like it to stay on...

Morning fellas, Hit a F***ing pheasent this morning and has taken whole grill out (grill that covers the radiator). Anybody know the part number for a replacement grill? Got a 58 Plate FR with BTCC kit fitted, I know there are two types, my version is this one...

I've had the seat out to have a look and found that on the seat side, the plug has been chopped off just leaving 3 wires and no male plug. Does anybody have a wiring diagram for me to check over to see which cable goes where? Don't want it to go boom!

I had that exact same problem over the weekend! piece of welding wire fixed that for me!

Good Morning all! Right MOT time is fast approaching and I have a slight problem with my air bag light being active. I've hooked up Vag-Com and traced it to the side airbag ignitor circuits on both sides. The previous owner had fitted cupra bucket seats into it, and i've checked underneath...

Turned out to be a dodgy negative connection, emery tape sorted. cheers anyway!

Ill plug in later and check, cheers

Can anybody tell me the location of the fuse for the front froglights please? I've looked on the image of the board layout and can't find reference to it.

Before a mod says anything this technically isn't an advert, just guaging interest to help me make a decision! If you didnt see my other thread I have cracked one of my 18" orions, and begrudge paying 250 for single alloy which is the best price I can find so far. So i'm toying with the...

yes, but slightly different haha part number of this one is 1P0601025D, mine is 1P601023E :(. WOuld anybody be interested in buying them individually as spares? I'm temtped to get aftermarket or some vw's and sell the remaining 3, they're in near perfect condition.

legend, cheers mate

Dont suppose anybody knows the PCD and centre bore size do of the top of their head do they?

Have spoken to Local dealer, might as well have spoken to a sock puppet. Ebay no joy, same with gumtree. Also really annoying thing is that I have driven past today and the hole has been repaired!!!!