Search results

thanks mate. yes , cupra r, 19

if you are sure it was for slow speed fan, then ok, fix it, it will not do harm but its way better to start cooling with slow sleep fan, than wait for higher temp to start hi speed.

first pic- it seems it must be connected into conector (left, on first picture). If it making noises, check maybe someone unpluged it because fan (or anything which uses that connector) is broken. second yes forge dv

Slammed looks much better :)

anybody measured weight of complete car , leon fr or cupra? mk2

Looking good. picture reminds me on my fr, first picture was at night and same angle :)

yes, but I done heat wraping for inlet also on previous car. And inlet temps was (a bit) lower. Will do same test on leon this or next week. we need this: https://www.designengineering.com//category/catalog/dei-cycle/insulating-materials/reflect-cool

for higher boost is 7 mm, usually if u have more than 15 psi, then put 0.7. I have 0.7 gap, no missfires, all fine I run on BKR7EIX

Its not bad, i dont prefeer so much spokes, but I like how this looks. I will just lower car, it will be much nicer then

Thanks, yes pulling nice, revo settings are a bit low, so have room for more power, but I am happy with this setup. driving great over potholes with kw var2, braking like mad, sound good... all fine for now

thanks mate, wheels are 19 from cupra r leon, will c/p engine mods list : k04 Loba hpfp RS4 Fpr S3 injectors Forge twin take Forge twincooler Full milltek exhaust Forge dump valve Revo stage 3 remap Thats just on engine, also a lot of other mods.. Brembos are 6 pot, not sure from which car

http://www.golfmkv.com/forums/showthread.php?t=9103 this can be useful for oil change

testing wide angle lens

welcome

ok, 13 can be but not on full throttle. on idle can be 14 , 14.5 or more (leaner). check what guys above said.. for leaks.

welcome

Thanks !

Then around 12.x:1 I will say. Dont push it till you dont check how lean is it.

Just two pics, waiting better weather to take few more my favourite part :) no, its not plastic caliper cover, they are 6 pot, I know its too much but looks nice :)

depends on your mods, remap... average is around 12:1 on full throttle