20vt

Hello guys I recently purchased and installed Bilstein B14’s on my FR & the car has been properly levelled & aligned etc. But for some reason the drivers side front sits 10mmish lower than the passenger side, and the drivers side rear sits 10/15mm higher than the passenger rear?! Has anyone...

Hi I'm new to the Leon scene but not new to vw cars, I have a APP Engine and want to mod it.. what bits can I do to it, I have already ordered an air filter up with the breather port on it, I want to cheap it cheap ATM but any posts are welcome! Please give suggestions and link me parts of you...

Hey everyone so after many many hours and long long nights of researching all over the place I was able to put together a few resources for everyone looking at doing an SMF (single mass flywheel) conversion to get away from the dreaded stock DMF (dual mass flywheel). Here are some options...

Hello all, Decided to start a thread to follow my progress, gain ideas and answer possible queries. Will be uploading some pictures to show how she currently sits and what has been done so far along with future prospects. Stay tuned!

Hey everyone so the 3rd gear on my 20vt 4wd has gone kaputo... actually i bought the car that way. regardless i think its 3rd gear the symptoms point to 3rd. Every gear engages just fine except 3rd gear, and whenever you drive the car no matter what gear you are in the transmission makes alot...

Hi All, My first major post, I know this sort of thing has been discussed before and I've done quite a bit of reading. I'm really looking for someone with first hand experience to give some advice, thanks in advance! So I got my Cupra for what I think was a decent price in the knowledge that...

hi i was on a drive yesterday about 50 miles an my oil temp touched 120 then started to flash red and beep i pulled over in a lay by less then a minute on idal went straight bk to 90 which is normal running temp... its never happed before so im kinda worried what could be the problems? thanks...

Hi all, I am looking for help in sourcing a workshop manual for the following unit AUQ 1.8 20V T If it was something like a Haynes manual with multiple units , that would be perfect too. I thought that this would be the best spot to look for one Any help is very appreciated...

Hello, I am planning on buying a Seat Leon Mk1 1.8 20vT 132kW and I would like to know more about the car. I currently own a Seat Leon MK1 1.9 TDIi 81kW and I am very satisfied with the car but I am looking for a faster ride. I managed to find something on the internet regarding engine...

Hello all. i recently bought a 2003 20vt leon. i went yesterday to get it checked out by a friend of mine, and it had been remapped, and was running very efficiently, got a print out to say it was runnig at 189bhp + 226lbft torque, so there clearly wasn't a problem at this point. but when i left...

Hello all. i recently bought a 2003 20vt leon. i went yesterday to get it checked out by a friend of mine, and it had been remapped, and was running very efficiently, got a print out to say it was runnig at 189bhp + 226lbft torque, so there clearly wasn't a problem at this point. but when i left...

hey guys i have a problem its on my 2001 mk3 ibiza cupra 20vt. the fuel gauge doesnt work, i plugged my vag com into it and went into instrument and got the gauges to move so im assuning their ok and it came up with a fault code when i tested it which was .... 00771 - Fuel Level Sensor (G)...

Hello, i sold my LCR coming up a year now and i am wanting to get back into a leon so was just wondering if the "Cupra 180 Engine has the same internals as the Cupra R's 210 & 225 engines?" My thoughts at the moment are to Buy a cupra 180 and in Time get: K04 Turbo Forge 007P Jetex Cone...

I've been talking to a few Ibiza Cupra owners in Greece who seem to opt for fitting the inlet cam from the NA 1.8 20VT to allow them to rev to ~7400 RPM and hence see more power at higher RPM. Just wondering if anyone has any experience of this and whether they'd recommend??

I have picked up a shareware version of VAGcom and cable from the bay. No fault codes read so that's a bonus! I'm just up for experimenting with logs right now, maybe find out how the car is running under boost and the effectiveness of the SMIC at the moment. So, 2 questions really: 1...

hi all where could i get a cheap used K04 turbo from?or has anybody got 1 they are selling thanks:D

Hi got a remap next week at jabba a friend said about a leon tdi down pipe from miltek will fit my leon 20vt will it fit?has any 1 done this to there leon? thanks

Hi guys,just had my car back from a garage after the timing belt broke and now she has problems starting (takes two to five turns of the key to start) and suffered turbo lag until you get past 2000rpm? The garage are right monkeys where I took it after taking them 6 weeks to do the job and...

does it really increase performence and full consumption? the car is standart right now with (no remap)

What can you advise.. what should i look out for.. any main questions i should be asking for..?? please help me!!:think::think: