airbox

  1. 1.2turd

    2016 cupra Airbox removal

    Hi guys, ive recently bought a cold air intake system that i want to fit myself, but i have no instructions to help with the process, so basically how the f**k do i remove the standard system. Cheers
  2. Standard air box!! Ibiza 6l 1.8t

    New here. Does anyone know where I can find a standard air box for my 1.8t? I feel I would rather have a standard box with cold air feed and decent panel filter rather than the Cheap filter the previous owner put on. Thanks in advance, mike.
  3. Drilled airbox and interesting results

    After reading some of the threads about drilled airboxes, and having enjoyed the sound (but not the the heat) of my Vectra's 57i kit, I thought I'd have a go at the Toledo's box. Removing it was easy, two screws and out it comes. After seeing where the filter came to on the lower box, I...
  4. Smoothing the airbox on a FR 150 TDI??

    Hi, have read a bit on the smoothing airbox mod. Is this beneficial to a diesel engine like mine? Does it give a better sound from the turbo etc etc or is it a waste of time? Any help appreciated
  5. olliep

    drilling and smoothing airbox on a tdi

    having just come from the world of 20vT, alot of poeple are in the habit of drilling and smoothing their air boxes. Just wondered if there was any point in doing it on a TDI?
  6. Pipe to airbox question

    Ive removed the airbox on my FR tdi. Now, there was a small rubber tube that went into the top half of the box. What is this tube, whats it used for and will it be detrimental to anything just having it hanging there, not attached to anything? Cheers
  7. MrBen2k7

    Open cone flter in OEM airbox??

    Hi all, As per title, can the OEM air-box be modded to house an open cone filter? Also, what size would I need to fit onto my MAF? I have a Leon TDi SE 110. Cheers, Ben
  8. zach225

    removing lower part of airbox

    hey all, just a quicky, as title says, need to remove airbox, top is easy but there is a weird bolt thing where it connects behind the battery, i have tried pulling but dont want to break it, any info please
  9. Taking the airbox ibiza fr

    Guys I'm guessing this is a really easy thing to do but I want tot ake the airbox off my ibiza to re-attach the water hose. i can clearly see that there is a bolt in the bottom right corner (by the battery) - guessing thats the obvious bolt however i cannot see any other (in the dusk light)...
  10. Replacing airbox with induction kit

    on all my other cars i have had, i have removed the airbox and replaced with an induction kit - differing makes maily but all on petrol cars ranging from 1.4l to 2.5l v6's. Now i have a Leon FR Tdi, can i repeat the process here? even if its a diesel engine? If so, has anyone else done it...
  11. J0N

    Same airbox??

    Someone asked me if a leon Cupra R (05) has the same airbox as a Cupra 20VT (01). The part number for the Cupra R is 8L9 133 837 E, anyone know?
  12. Righttoe

    Standard Airbox

    Hi Guys, i currently have a Jetex cone filter, but its to small and knackered, i was going to get a mahossive one like everybody else but wanted to do something different. Do you guys think it would be just as good to run standard airbox with a better cold air feed from where the old side...
  13. Standard airbox or Induction cone?

    I think the majority on here have the cone, but I am going to switch back to a LCR airbox (to be modified with it being smoothed and run a panel green filter) for me its more enclosed, more stealth, heat resistant and I think it was J@mes on here who proved some very good readings what do...
  14. nuts

    Drill Airbox

    ANyone got a guide on how to smooth and drill the LC airbox please? Nuts
  15. Airbox Problems

    Hey all After much thought and deliberation (lol) I have decided to remove the Carbonio and go back to the smooth airbox with panel and cold air feed. Bit of a ball ache though. I cant find my old airbox!!! I can find all of the intakes, airbox flexi etc. I have put a thing in the...
  16. rocky2008

    Drilled Airbox, help please..

    the other evening i drilled three one inch holes in my airbox, they are drilled in the correct place and i think it sounds superb underload! however, how will this effect my fuel economy, can someone please shead some light on this :) cheers.
  17. ChrisGTL

    SFS Hose AH30 - Airbox

    Hi Guys, i bought a SFS hose (part number AH30) a while ago, only just round to fitting today..... I thought this pipe was to replace the small flexi plastic from the MAF to the solid air--intake plastic bit..... Its too long and has a 45 deg bend half way down.........where does this...
  18. Shaunyboy

    Airbox

    I was reading D.K's guide on smoothing the airbox and he said DONT remove the flap to the MAF, why not? i see this as a restriction, and your trying to aid airflow so its renderd usless as the same ammount of air is going in as last time.
  19. Derestricting/Drilling standard airbox

    I was wondering if this was possible on a little 1.4 and how i would go about doing this. e.g where to drill etc.
  20. w8scc

    Carbon Dynamic Airbox - BMC Airfilter

    Hi guys.. need you help.. I want one of the above (a Carbon Dynamic Airbox - BMC Airfilter) .. they are around 180quid.. but there is someone selling one for around 45quid.. only problem is.. its for a 1.6 MG.. not i can buy a reducer hose.. as the indcution hose for a MG is only 69.5mm and slap...
Nimbus hosting - Based solely in the UK.