beam

  1. Location of auto leveling sensor

    Hi all this is my first post. Hope all are well. I have a MK3 seat Leon (2013) with tech pack led lights. The lights have been fine but recently they are far to low on dipped beam. I have tried the usual of adjusting the screws to raise the lights but it seems to make no difference. To give...
  2. Dipped beam headlights

    Hi guys, at the weekend there i replaced my headlights bulbs with upgrade ones but they are not at the correct level. They point too much into the ground. How do i resolve this? Any help would be appreciated!
  3. DaveysFR

    Bi Xenon Dipped Beam very low since lowering

    Hi guys, I lowered my Cupra on Eibach Sportlines before christmas and since then the AFS system in the Bi-Xenons seem to be very low on Dipped beam. I replaced the sensors on the front passenger hub and rear arm in the position they were in prior to lowering the car. Just wondering can...
  4. Jon TDI

    Dipped beam horizontal alignment.

    Anybody know how to adjust the dipped beam horizontally? The vertical alignment is fairly obvious with the white screw at the back of the headlamp, but the horizontal adjustment is not so obvious.:(
  5. No Power to NS dipped beam, Heeelllp?

    Installed a HID kit a couple of weeks ago and my NS bulb was intermittently on and off. Tested the power feed directly from the original loom and it has no 12v feed also when I twisted and turned the connector, what sounded like a motor/relay started whirring! Has anyone else come across...
  6. HID conversion on H1 bulb (full beam)

    Hi all just wondered if anybody had fitted the h1 full beam hid conversion kit on there lcr. i notcied on mine its got a black box on the back of the bulb. how would this work? what does it do?
  7. FRESHMODE

    I need a new rear axle beam! oh dear

    Hi guys Oh dear, as a result of me sliding the rear end into a curb, I have ruined the rear axle beam and need a new one:cry:. Thankfully the stub axle/brakes/wheel tyre are fine, even the ARB is saved:wtf: If anybody has any advice or know best place to purchase a new rear axle beam then...
  8. vroomtshh

    HID for main beam and fogs?

    Has anyone ever fitted HIDs for there main beam and fog lights. Now I practically never use my fogs, and I kow its not a huge advantage for the main beam either. I'm just fussy and wanted things to match. I've ordered the kits. Just wondered if there was any pitfalls/advice out there
  9. Bignod00

    Dipped beam is really dim!

    Hey all, recently purchased a 55 plate Leon FR+ 150 tdi and have noticed that when driving on dipped beam, its like having two candles in jam jars on the front of my car! Was wondering if any one else has had this problem, whether its a fault on the Leon or if my alignment / bulbs may be...
  10. wayne lcr

    rear beam bushes

    tryed to fit my rear beam bushes today and they was to big mine was 69mm and and the new 1s was 71 mm i no 2mm ant much but they was to big to fit in any 1 no the sizes any help would be greatfull thanks
  11. Main beam????

    Hi all newbie hear just wondering if you guys can help me, i am needing the best main option you guys know to go with a hids4u 6000k conversion kit i just feel the normal yellow light doent look very good with the hids's:cry: just wondering if any of you guys knew a good white mainbeam bulb to...
  12. simonthekane

    Beam Pattern with HID Kit

    Hello, Does anyone have any photos of the beam pattern with an HID kit on a cupra ? Im thinking of perhaps getting a kit, does the headlight need any modifications as if im not happy with them can they be swapped back easy enough without any damage ?? Thanks
  13. DannyC87

    Main Beam Dashboard Light not working

    Hi guys, bit of a strange one; my main beam dash light is not coming on with main beam anymore. It does come on from time to time, but never instantly, normally only after main beam has been on for a few minutes continuous. As it still works sometimes i'm thinking it can't be the bulb; dodgey...
  14. simonthekane

    Main Beam adjustment

    Can the main beam aligment be adjusted on the cupra lights, for some reason mine seem to just light up the left hand side of the road and not alot ahead or to the right :( Its pretty shocking imo and if it can be adjusted it would make them so much better :) Cheers Si
  15. chris27

    HID Beam Pattern

    Jus wondering what the pattern is like on everyone elses cars who have fitted HID's as ive got my mot soon. Has anyone got a decent beam pattern with the kick to the left with the standard headlights?? Ive got h4 bulbs if that makes any difference to the headlights between models.
  16. Nef

    Rear Axle Beam, Cheapest place to buy one.

    iv had a little accident in my car, a car hit my rear wheel and has bent it in at the top, so as a result i need a new rear axle beam and bushes, and just wondered where the cheapest place to buy the part would be. and also is it best buying this part new or from a breakers? thanks for any...
  17. acidstrato

    how the heck do you get the supersprint backbox pipework over the rear beam?

    any tips? just cant seem to straighten up the box as the pipe aint fully through
  18. Side Light and Full Beam

    Help Please! I have just changed the headlight bulbs with no problems but after a long look at the side light and full beam, decided it looks a bit more tricky and as light was fading gave it a miss for today ....Is it a headlight out job? I have removed the rubber cover but didnt know if...
  19. cuprabaz

    Rear Beam Bushes

    Having looked through a load of threads there isn't much info on these. I know Badger5/VT make them. Powerflex list them for the mk3 ibiza PFR85-206 which everyone say do not fit. The polo mk4 bushes are supposed to fit. The mk4 is not listed as such on Powerflex's website it just lists...
  20. how do you adjust the main beam height level on leon mk1?

    hi, i have a seat leon mk1. just wondering how do you adjust the main beam height level? i have tried using the dial in the car located on the right side of the steering wheel. i turned the dial as high as possible. but the main beam is still way too low and when i am driving on long straight...
Adrian Flux insurance services - discount for forum members.