bits

  1. Removing bits for spraying

    I'm sure these questions have been covered before but i've tried to search for them and didn't have any luck... maybe i'm not trying very hard, or maybe my spelling is shocking. Anyway I have a Cupra (pre facelift). Regarding the front and rear bumpers, do they come apart? I mean does the...
  2. RS6

    My Seat Leon Cupra R ** CAR SOLD* NEW CAR!

    Standard with Stage 2 mods fitted it made 235bhp and 219.4lb ft so not bad for a 210! AMD Stage 2 remap it made 270bhp + 319.4lb/ft with Forge TIP ------- Now Running Revo Stage 2 + Badger 5 TIP, Jetex Cone & Jabbasport Heat shield with cold air feed, X4 new coil packs, new thermostat...
  3. cuprastupot

    Black LC: Liquid Gauge Readings

    Some pictures of the motor in the snow - very dirty, sorry. Then some pictures of new front very clean - had bonnet sprayed looks like new now. Just debating whether to put the cupra r splitter back on? Also comments welcome and appreciated on the top pre-facelift grilles. I never really...
  4. DanLewis1991

    Interior Bits

    okay guys im after the Cupra vent bits and the handbrake cover: read on here that the handbrake cover is £13, how much is the vent bits? does anyone have the part numbers? thanks, dan
  5. respraying bits and pieces

    My LCR has a few battle scars and i'm thinking about trying to sort them out in the new year. The boot has a blemish under the lacquer where the dealer touched the paint up and mybonnet has a dent from kids chucking a pop bottle. I have painted a couple of sets of wheels now and have...
  6. cold start problem + other bits

    Hi, Ok so here goes my 2001 tdi is a bugger to start in the cold it finally coughs into life sounding like I have just fitted a new fuel filter (cough cough etc) I have new glow plugs and never had the problem in the summer in addition my coolant level drops under normal temp operation...
  7. tdi FMIC help needing ordering bits

    spoke to brad1 not too long ago about what i need to fit a FMIC on my tdi110 and forgot what he said and he aint been on facebook in a while this is what i know of so far : im hunting for a 130/150 egr manifold egr replacement valve - i dont know if i can order one below from forge if...
  8. Removing wheel bits

    I have standard wheels on my 1.6 at the moment, and am wondering how to remove the centre caps, Im guessing they just pull off but want to make sure so I don't break them! cheers
  9. Plastic bits

    So the plastic strips down the sides of leons, (1.6) how do I get them off? wanting to spray them silver thanks!
  10. painted bits on engine . (pics)

    hi guys last week we had a crack on tommys engine bay as winter has taken its toll and made all parts look frosty and dirty so heres a quick pics of what our results turned out looks much better than it was. soz mate but got to but this up of you doin work rocker cover looks bright...
  11. How to remove a few bits of trim?

    how do I remove: The passenger airbag plastic plate on the dashboard? The drivers and passengers inside door handles? - does this mean taking off the door card? (same for rear doors as well) there appears to be two halves to the handle. I am guessing one half can be taken off without...
  12. shocks and springs ? or just springs and other bits ?

    Hi there.. Am looking to handle up my mk1 fr. Now do i go for a complete suspension kit.. ? or do i do decent springs ,underside arb , and powerflexx bushes ? .. There both about same cost wise obviously a little extra work.. But what do i do ?? i can do the springs and shocks at a later date...
  13. Cleaning the chrome bits...

    Hi All, Can someone recommend how to clean up all the chrome finish plated plastic bits like the SEAT/Ibiza/FR badges. I notice there appears to be small areas of tarnish, particularly on the boot badges, presumably from all the winter salt etc. that gets sucked up onto the boot lid...
  14. Tfsi_Mike

    Interior trim bits *another bit*

    Any one know how easy its / the method to remove the trim bit where the cig lighter goes, without breaking anything...? Also the door trim bits? (The ones that can be replaced with alu trim bits) Cheers
  15. SteveTDCi

    more bits fitted

    i received a delivery today from Sere Motors ( great service btw) and i could hardly wait till i got home, anyway my box of goodies contained, armrest rear spoiler alloy look trim black grill i've managed to get the grill in and the armrest on. I've got pictures that i'll post later and...
  16. ibiza_adam

    A couple of bits...

    Hi guys, not had the ibiza long but just got a couple of questions!!! 1) I don't think the car has an alarm (07 Ibiza Sport 1.4) is this right? If so can I just plug and play a standard alarm etc of another seat? Or just get a clifford can bus 2? :cry: 2) My brake lights come on without...
  17. luke07cupra

    Bits and bobs..

    Reckon i'm gonna go for a whiteline antilift kit. I'm just wondering what other bits and bobs i could add at the same time that might compliment this kit. I'm thinking: Torque arm insert? Certain uprated powerflex bushes? Maybe a dogbone mount (think thats more transmission though)...
  18. Bits and bobs, stereo and keys...

    Haven't been on for a while (seems I only ever come on with questions, how rude!) but I'm back again to probe your collective brains. My Toledo V5 came with only one key and unfortunately this one key just so happens to be a non RCL key. I've read up on the reprogramming guides, very useful...
  19. Fix some bits day.

    Just gave the Arosa it's yearly service and at last had time to fix the door checkstrap mounting on the A post. No more clonking when opening the door, marvellous. I've taken some photos and may do a " How Too" later if anyone is interested.
  20. Marshy's Mk3 Ibiza Cupra. FMIC and a few more bits

    Thought I'd put finally put some pics of my car up, made a few small touches but spend most of my time keeping it mint. Plans for the future are for alot more power, just deciding what route to go down at the moment Anyway, bought it in October last year, all standard bar tints and...
Genuine SEAT Parts and Accessories.