blanking

any 1 used 1 of these http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190202TUN&product=FMEGRBP

Hi folks, Hoping for some advice here....got a 2007 Ibiza Cupra 160 PD and was wondering if there is any benefit in blanking off the EGR as I have done on my T4 and Passat? What, if any, are the pitfalls? Are there any issues with the MOT or the ECU etc etc? Any help always apreciated...

I'm sure I've come accross a nice picture of template in a thread some where many moons ago. The aim is to get a proper one made up ready to go. Any help would be appreciated.

As the tittle suggests does anyone know of a blanking plate to close off the reccess left by the head unit and climate control? I've removed both as a weight reduction excercise but fancy capping off the dash so as to not just have a big hole

hi guys can some one tell me exactly the best way to blank your egr like does the 4mm hole trick work and is there any way to keep the light off?? thanks simon

have anyone tried in the past on a 1.2 or any other ibiza applicable,on the throttle body there's a EGR input with causes hot and contaminated air into the intake system. What id like to do is take the pipe off the throttle body and let it vent external and make a blanking plug so the throttle...

can anyone tell me what a secondary air systym blanking plate is

Im at that stage this weekend where i am buying what i want! ive been looking up sites to buy the allard egr blanking set but its not got exactually what i fully need! http://www.egrvalve.co.uk/index.php?page=products basically im going to order the 3rd set on the link above! but i need...

Hey, I need a EGR valve blanking plate for a AHU engine, does anyone know where I could buy the plate, is there anyone here who could make one ? Thanks

what is this used for (obviously a blanking plate yes) is this what is used when the N112 is removed?

Have 2 x holes where I believe front fog lights or blanking covers may have originally been on my 99 Vario Est. Assume previous owner removed them for some reason and never repalced. Ideas where to find covers would be appreciated folks as 2 x holes is quite unsightly. TIA for any replies.

as above any one got a link, the intergrated engineering one does not work any more cheers

Decided to blank off my egr intake with a plate replacing the metal gasket in the pipe connecting the down pipe to the underside of the egr valve The engine check light comes on for about 50 miles and then goes out again comes on and then goes out again, this I can live with. Car now goes...

Hi folks, As the subject line says, the blanking plug in the base of the EGR keeps blowing out !!! We have replaced it twice and it's gone again. Perhaps we just haven't been able to fix it tight enough but we don't know too much about these things. First off - why would it blow out in...

whos had experiance with this? anyone? i know alot of turbo boys do this and wondered what the effect was on the 1.8t? HoocH

anyone any idea where i can get a decent but cheap LCR Blanking Plate for the sterio, so i can fit an aftermarket one..... Many Thanks Ross

I'm fairly new to PDs Who can teach me about blanking off the EGR valve?

Hi all is this the oil blanking plug for the oil temp sender?

Does anyone know where I can get a Lamba Blanking Plug from like the scooby one in the link. http://www.tsl-motorsport.co.uk/newsite/products.php?nav=300000&section=300008&detail=66 Its for a 1.4 AEX exhaust manifold, does anyone know if the 1997 AEX was fitted with a lamba sensor ?

Hi folks, had my cupra for 5 days now and loving every minute! Just one small problem- the lock blanking plate on the passenger door falls out very easily. There doesn't seem to be any broken bits and i cant hear anything rattling inside the door. I found a post on this problem from 2003...