build

  1. Practical Boot Build.

    Hi there guys, just got myself a 1.2 sx. The plan is to go down the ICE route instead of engine mods/remapping, due to it being only a 1.2 & i love my music. Now I'm fully capable of changing the stock speakers & fitting a new headunit. But I need some idea's for a 12" sub enclosure...
  2. Mk3 Ibiza cupra (Ko3 Hybrid Build thread)

    Seems as though my other thread has vanished :lol: so... we reminder of my car... 20vt, forge cooler, star map. yada yada :lol: copied from FCN... Well its taken all this time for the project to finally begin due to a problem with the car using coolant every other...
  3. Pressure build up in cooling reservoir

    I seem to be having a strange problem with pressure build up in the cooling reservoir. I started the car this morning and the red light in the temp guage was lit and temp guage stayed at zero. I checked the coolant level which was below minimum but once I unscrewed thr cap there was pressure...
  4. gazcuprablk

    how much for full engine build with forged pitons/rods valves etc

    right ive been chatting to a well known engine tuner around my area and have had a quote of 3k to have my engine re-built using wossner forged pistons upgraged rods supertech valves/springs and retainers aswel as all the bits to make it reliable(ish) and they'll bore it out to 1870 cc, is...
  5. jake

    project stormtrooper LCR

    hey guy's im back again, with another lcr. this time an 05 plate. platinum grey pearl. so no fading colours etc. mods already on the car induction kit-might put air box back on forge 007p short shifter h&r springs hubsentric rear spacers exhaust remap think...
  6. Martin_DSG

    New build thread

    Ok, the old one was a little all over the place and messy. Lets start afresh. In the begining. Then. Painted the callipers Painted the wheels. Black side repeaters with chrome bulbs. Bee sting aerial, silver rings painted red. Pipercross induction kit. SCN sticker.
  7. str8ballin

    Stage 3 Polo 1.8T build

    Hi all! I have finally got round to getting the polo sorted again, thought I would make a new thread so all comments and opinions welcome After making 400hp @ 1.7bar (gt3071r 0.62 a/r) and losing soo much oil I decided it was time to open the engine and see whats whats. I checked...
  8. Mk2 Ibiza build thread

    Here is my build thread Spec Seat Ibiza Cupra Sport Gti 16v 1998 2.0 16v Abf (165bhp approx) Lowered about 90mm up front 110 out rear R&J tunning Stainless steel decat system Standered Ronals 16" Powdercoated Black Anthericte with Gold metalic.( Thanks to http://www.central-wheel.co.uk)...
  9. Israeli Seat ibiza MK3 20VT build up

    My friend seat ibiza Mk3. enjoy. http://videos.streetfire.net/video/Seat-ibiza-build-up_680207.htm
  10. barnsley

    Polo Gti Badger 5 Big Turbo

    well its not a seat but here goes anyway sold my leon ihi and got this to go to work on this is how i got it 6 months ago then i fitted the cup kit fitted some R32 front and rear brakes and alloys ibiza cupra bushs then fitted a golf edtion 30 steering wheel...
  11. wenman

    Mk4 boot build

    I personally dont think this would work but a friend of mine thinks i should take the spare wheel out and sound proof under neath it, then use MDF and mount the sub above where the spare wheel would be but with the magnet facing up. I don't think the bass would sound right with no enclosure...
  12. Robbie C

    Robbie C's Ibiza Cupra

    Engine 1.8 20VT (AYP) Block overbored to 82.5mm (1847cc) Ported & polished cylinder head w/ uprated stem seals Ferrea Super Alloy inlet and exhaust valves Ferrea valve springs and titanium retainers JE 82.5/86.4mm 9:1 CR 2618 alloy pistons Integrated Engineering forged conrods Uprated...
  13. My Leon Progress, Air ride, smoothed, NEW winter wheels MAM MT1's MEAN!!! PG16

    Hi guys, been around and off and on with the show scene over the past three years when i brough my seat, i did originally want an LCR but insurance costs were insane at 19 so went for the 130bhp diesel. This was her soon after i brought her with a few little mods. Over the past...
  14. 98 Ibiza 1.9T ( new build )

    Thought i would share with you some details of a car im building specifically for strip use. Its a scruffy looking 1998 Seat Ibiza Cupra GTi 2.0 8v - the car is very solid, a little tatty in places but nothing that cant be sorted. Cost £400 and i bought it off a Farmer in Cumbria ( still trying...
  15. si-mate

    An idea for those with multi-page build / Readers ride threads

    How about putting a 'key moment' list in the first post with links to pages of significant changes / information? It might be a lot of work, but it would help those who want an overview of the project without wading through pages of chat.
  16. Sportrider

    MK4 Ibiza boot build

    Here it is carpet match just false floor
  17. jay26

    ibiza cupra mk3 build with pics

    this is the latest pic of how i got it this is now after few more things done and the all important badge lol
  18. burnsey

    Black Ibiza Mk3 Cupra

    Old car Yaris TR 1.3 57 plate. Got really bord of the car,and old enough now to get insured on decent car. New 2001 Cupra: Price: £3000 Miles: 77000 Mot 12 months No Tax Mods included in purchase: Stage 1 remap(180bhp) Longlife back box(hate it) All windows tinted black New...
  19. Ibiza gone...... TT Quattro - new pics

    Been on here a while now... done a few small mods to the car so thought i would start a build thread...... im going for a subtle and understated look for my pre-facelift LC.... and hoping for about 240-250bhp ..... IMO thats enough for a FWD car... Mods so far: 17'' TT six spokes lowered...
  20. deadeyejim

    Build Quality

    We bought a Fabia VRs at the weekend to replace the G/F's Lupo. Now I've been toddling around in it and it's made me realise just how badly built and finished the Ibiza is. Better trim, much better soundproofing. Better ride quality and better driving position. I can honestly see me...