camber

Hi I went to have 4 wheel alignment done today on my lcr just to check everything is ok, glad i did!! toe setting where out by a bit so got that adjusted. Camber on both sides where out drivers side was in its limit but the passenger side was out of its limits. Its was reading -1.33 degrees...

Hi guys, I've noticed recently that my passenger side rear wheel has alot of negative camber, so from behind it looks like this - /---| Drivers side loooks fine but passengers is sqwif! Also, had tires changed recently and the passenger side had worn away the inside massivly! Car...

Hi, I have an Ibiza 58 Ecomotive. My wheels need to be aligned, as I'm having a Camber problem and the tyre threads are being eaten one from inside, the other outside. However my local garage said some car cannot be Camber adjusted as the direction bar does not have the adjustment bolt...

Hi Pretty fed up of going through lots of front tyres, just checked them today as the car has been wheelspinning lots with hardly any effort and the inside of the front tyres are down to threads the rest of the tyre has boat loads of tread left on it, so i really need to get them sorted...

Hi all, Just a quick question really, how do i adjust the camber of my front wheels? Its currently Possitive and looks nasty, i just wanna make them the same as my rear wheels, or slightly negitive. Thanks in advance, Chris

hi does the ibiza fr tdi have adjustable camber?? if not is there any camber adjustment ends available to fit at all? many thanks simon

I am looking to put new suspension on my 2003 leon 110 tdi and was wanting to ask if i will need to have the camber adjusted after i do it?? My last golf required that the camber be adjusted after this is done. I have tried to do a search of the site but it just keeps failing so appologies...

hi i need to set my camber and wondered if anyone knows what the degree/measurment is? thnks

I have a1998 Cordoba Vario and I have found that it is eating the inter edge of the tyres on the front, I have check the tracking and that is fine, but I have been told that you can set the camber on these, does anybody know if this is true? Car has not been lowered or any mods apart from 16"...

how you can do a camber in the back ? any special kits or bolts ??

hey ive been searching all week, i put coilovers into my ibiza cupra a week ago and dropped it 120mm, now i have about -1 degree of camber at the rear and plus 0.5 at the front, really need to adjust the front, is the car adjustable standard? any kits availible? plz plz plz

Went to Elite to get alignment done, they adjusted the wishbone and subframe to the max and the camber was still out of spec, -2.0 OSF and -1.3 NSF. How can I get it back to what it should be?

does anybody know the original camber settings for the ibiza????? also does anyone have any "sportier" setting angles that are tried and tested? lowered 30mm on bilstein shocks and springs. many thanks chris

On the mk4 ibiza, is the front camber adjustable because i've looked at it and how the shocker slides into the back of the hub makes me believe that there is no adjustment!! I'm thinkin the lower I go the more negative camber i'm going to get!!!! Cheers for any advice!

Ok so ive been thinking about trying to source camber adjustable top mounts to get a little negative camber on the front of my leon and stumbled across regal motorsports negative camber shims... has anybody used these? got any opinions on these? or should i keep trying to source adjustable...

Been trying to get my front wheels aligned on my 04 plate LCR for ages now,different places tell me a different story every time.now according to the print out the only thing which is out of spec is the off side front camber(too much negative).one of the alignment places visited said this would...

how can you correct camber ave jst fitted v-maxx coilovers?? ailment places do they do the camber aswell??? help please cheers Stuart

does the camber kit exist? I don't succeed in finding it. can you insert some links? photo? and other ? thanks

Please note that I have read the other threads on this matter but would be very grateful for an update / further info. I purchased an Altea xl 1.9TDI Stylance in August 2007. It was an ex demo with less than 2k on the clock. All fine for the first year then the rumbling noise between 20 and...

Hi Guys, My Altea is chewing rear tires and I'm told it's not the tracking and that it is the Camber, are 04 rear camber angles adjustable? I'm told it's out by about a degree..... What would cause them to be knocked out? Cheers for your help!! Gavin