clutch

just got back from drive earlier an when was about to come onto motorway put my foot down an heard a loud bang like the clutch had smashed, engine vibrating an clutch pedal vibrating loads an can hear some knocking in engine, got car home got to wait till tomorro to see if can get garage to...

Hey, I was wondering if anyone else with a 1.9tdi finds the car easy to stall in the cold weather? Mines a cupra don't know if that would make any difference? When I start up from cold especially at this time of year the car is mega easy to stall if I have to do say a standing hill start...

Noticed on my Leon today that its sometimes tricky to get it into gear, almost as if the clutch isnt fully disengaging. Is an FR TDi 150, chipped to ~180bhp. 6 speed box. The car has done about 52k miles, so I would have thought the clutch would have lasted longer. Its done it quite...

When i get my lcr im planing on starting moding right away with a remap and turbo back blueflame. will i also need to uprate my clutch? what is the standard lcr clutch rated to bhp wise?

driving to work in the middle of the new forest. and bang the clutch hits the floor. im sure this has happened to pretty much every seat cupra owner. so drove the car with no clutch to the my work took the peddle off and going to weld it tonight. it really is a love hate relationship with this...

Hi guy, I have install south bend stage 3 OFE on my leon cupra tfsi but i have some little noise/rattle/vibration... Now the clutch have 30 miles but i feel from the beginning a noise from gear and clutch i explain well. 1) When i push and hold the clutch and push throttle and...

Hi all! I need to weld my snapped clutch pedal but is there any handy tips hints for the easyest removal of the clutch pedal? Cheers Daniel

Had my car remapped today by will and hats, off its a totally different machine. It is now running 177 bhp and 316lb/ft of torque, so as you can guess I've got some serious clutch slippage issues. How long can I run it on the standard clutch? As I can't afford an uprated on yet. Also is fitting...

Any1 no much about these dual mass flywheel's?? i no u can get a single mass kit but on the 150fr tdi arl engine there aint 1 for it it's just the clutch is slipping bad at 2k revs and gonna do clutch on monday and wondering if wood get away with just doing clutch or wood u need to change the...

Hi all, hopefully you can help me! Last night driving home, pushed the clutch down and bang, straight to the floor, thought **** ive snapped the clutch pedal, but then pulled the clutch back up by my hands and it just popped back up again... Put my hand up at the top of the clutch pedel...

drove my car morning. Clutch usual biting point. Tryd to get up kurb and it scrapd. Continued drivin. Was fine. Parkd up. Went bk to it now. And the bite was so low. The pedal hasnt snappd. And comes up. Jus the bite is very low.eg gear cruncin low Any ideas?thanks

I have this intermittent problem with my clutch pedal. When I press on the clutch pedal it makes a sort of 'clunking' noise, it happens as you start to press the clutch? no other problems with the clutch or cable apart from this noise?

hi guys i've owned my silver 280bhp porsche wheeled cupra (formally JJ_arosa) for around 6 months now and it's time for a new clutch.... am i right in saying i need the 2.8 golf vr6 clutch??? Is this the right one...

Ok only just bought the car and it looks like something has broke on the clutch pedal. Basically I can pull the clutch pedal to normal position with my foot but straight away i go to press clutch it drops about an inch still is driveable but just really low. I have had a look under dash and it...

Whilst pressing down clutch today in traffic, it seemed to crunch and move down about an inch!! The pedal now seems lower than brake pedal and biting point has now lowered from about an inch from the floor!!!! It still works at moment, but obviously not right!!! Is this the dreaded...

i have been to my local seat dealer for the bracket that goes round the radiator expansion bottle and supports the clutch cable on the abf engined toledos and they cant even find a picture nevermind a part number so i was wondering if anyone on here can help me out with a number also the...

Hi all, My clutch is slipping at the moment and it is getting progressivley worse. I am a student and have limited money to be upgrading the clutch, but im just wondering what the options are with the clutch. I have seen mention of a G60 Flywheel and Vr6 CLutch, what is the deal with this...

over past 2-3 weeks there's a noise coming from front of car / engine bay when i press or release clutch. only way i can describe it is to say it doesn't sound like a mechanical noise (i'm not saying it's not mechanical only that it doesn't sound so) it's more of a humming type noise that lasts...

I recently got a remap done on my 1.9tdi toledo to 145 bhp & 280 torque. Its an 02 model with 98000 miles. After geting the remap done there is a judder at accelerating up through 3 -5 gears. i have a notion its a flywheel judder caused by the remap but woul like to see if any1 else ever had...

hey guys would just the uprated sach clutch plate be any better just seen them on jbs so was wondering if it would make a difference thanks