clutch

My re-maped FR TDI clutch has been on its way out for a while. I have started looking at the costs and am thinking that Sachs clutch and DMF at the same times would be sensible. Had mixed opionions on changing flywheel at the same time so comments welcome. I E-bayed "CLUTCH KIT AND FLYWHEEL...

I have just got a Sachs clutch and a jabbasport flywheel fitted to my 04 LCR.There is a chattering/ratteling noise coming off it when ideling.I was just wondering is that normal.Cheer's

Just thinking about the engine/box mounts, gearbox oil etc.?

I have read numerous topics about the clutches on the 1.9 tdi 150 and im really close to buying one and getting it remapped soo im gonna put an uprated clutch in it to hold the power but im really confused; look below and see the two clutch kits, very expensive...

Mine has started to slip and wanted to know if it is adjustable, so I can gain some extra life out of it?

Has anyone had any issues with fitting these clutches, as i have just had my Southbend Stage 4 clutch and 13lb flywheel fitted and the garage is saying that they can't select any gears and that there is not enough clearance? Anyone got any ides? :(

Hi, I've had a noise from the clutch but only as I release the pedal and the car begins to move again. The noise usually happens when moving slowly, say having slowed down to approach a speed bump and then moving off again. The noise is best described as a moan or drone (no, it's not my wife...

hi guys im getting a remap today which will see my cupra 150 to 210 bhp and 330 ft lb torque. what clutch should i go for as its inevitably going to need replacing. thanks

Hi Guys Whilst driving When I change gear I get a clunking noise when it engages. Have depressed / released the clutch with engine off and no noise. Have depressed / released the clutch with engine running but stationery and it also clunks. Also: The clucth operates fine, but I...

Hi all, My partner has an Arosa with around 40k on the clock. The clutch bite point has got quite high in recent months. Is it self adjusting or likely to be up for replacement? I have notice there is a rattle from the release bearing recently too so that can also be changed. Thanks.

I think my clutch is on its way out and I may aswell get an upgraded clutch as my car is a stage 2+ TFSI running 285hp/300+ tq, what clutch are you stage 3 TFSI's and stage 2 cupra guys running and how are you getting on with them. The help will be greatly appreciated.

Any one had clutch slip in a TFSI yet, I noticed it a few times over the last couple of weeks. Strangely enough only since I fitted a milltek downpipe. It only ever last a couple of seconds when the car is at about 3k revs it shoots up to nearly 4k revs for a few seconds and then returns to...

.

right i have read the sticky before anyone shouts at me and yes the plastic clip has broken the question i need answering is the garage have said that the reason for the breaking is that the clutch is heavy ?? and i need a new clutch what does he mean ?? the car has done...

hi im new! got a 97 r 16v. wouldnt go into reverse and very hard to get other gears. clutch biting point on the floor. put a spacer on clutch cable by the lever on box to give it more travel and pulled self adjuster either side of it to reset it(think thats how u do it anyway!?). goes into gears...

As some may know Im in the process of changing my pedal box. Currently the clutch cable is still attached to the gearbox as I dont know if its manual or self adjusting. It doesnt have the white strap on it that you need for some and it didnt come with it when I bought the cable new. Any...

after taking the plunge and spening near on £900 on new wheels and tyres only this afternoon my clutch has decided it wants to start slipping now. Looks like the clutch and diff is going to have to be upgraded sooner than i thought:(... i have enquires about getting a sachs clutch fitted...

Hi, I noticed something odd yesterday whilst driving home:- The gear stick is able to move out of which ever gear its in, into neutral by simply moving it with my hand, no need for the clutch to be depressed what so ever. This isn't right is it? When its been 'popped out' I cannot...

I was going to sell this clutch but it looks like 2 of the prongs are snapped. The thing is, the edges where the prongs used to be look clean and don't like they've sheared off. It's looks to me like they've either been removed on purpose or the clutch was made this way. Can anyone confirm...

Hey guys, been taking my gearbox off my car the last couple of days to fit a new clutch and flywheel with 72k on the clock it ain't too shabby considering its been least remapped for at least the last 25k-30k miles, finally got the box off today with my mate after a lot of fighting lol, tight as...