downpipe

Hi all I am planning to get my 2019 2.0tsi dsg estate remapped. I am looking at a stage 1 which gets me around 245hp Reading on here there seems to be a lot of talk of removing the precat. Now, showing my ignorance, is the precat in the downpipe? and is it a case of just removing the precat...

Anyone able to link a video or any photos of how to remove a downpipe on a 1m cupra r without dropping the subframe. I trued to remove it earlier and didnt really have clearance with a spanner and dont have room to drop subframe

Brand new Toyosports downpipe for cupra r /Mk1 audi tt 225. Please note this is ko4 fitment. Plus scorpion (used) decat section heatwrapped. Gasket kit/ some bolts.. Etc..included Ideal if your cupra r has blown its flexi and need a cheap replacement or fancy bit more power with decat...

Anybody selling second hand CJZC Ibiza 1.2 facelift 2016 New Engine. De-Dat Downpipe needed.

Hi, There are a couple of threads on here about this but no real answers... My LCR1 started blowing from the flexi joint on the exhaust downpipe so I bought an upgrade. After a significant amount of time with an angle grinder on the rushed remains of some bolts and a lot of messing around, I...

deleted.

hello i have searched and found different answers by different posters. im on standard map mods are catback 2.5inch exhaust dynatwist 007p and i want a downpipe/decat for a better noise. i have a company that will make me one. im just wondering the best size for my spec 3...

does anyone know where i can get a 3" decat downpipe for my leon cupra so that i dont need to chop my milly

I have booked my car in for a custom exhaust but due to 'legal reasons' they wont fit decats and downpipes. so i am looking to buy a 2.5" decat and downpipe and fit it myself before i take the car over. which are recomended? ive looked at miltek and blueflame. just wondering if anyone else...

hey guys i already have a decat pipe so would only want the highflow downpipe,best place to get this and rough price? also herd this causes pops and bangs? true? Thanks

This mite make it a little easier for you :) http://www.youtube.com/watch?v=_t0mDTK23hs so dont think just buy

Hello all, I have read pages of posts on this topic, but I am actually more confused than when i started. All my mods are listed in my sig below, next I am planning on going to stage 2 and i am going to start by getting a 3" downpipe and race cat, i currently have a Blueflame cat back, but the...

Just had my 3"downpipe an sports cat put on an Forge TIP and jesus the noise is perfect, sounds about normal(as it did with just my cat back) but as soon as u open her up just wow, an the pops an burble's ohhhhhh am in love again. would so reccomend this to anyone debating it an would like to...

Hi guys Am after a downpipe an sports cat now i could get the blueflame one from awsome or been looking an hearing good stuff about pipewerx, so just wondering what u lot whould go for cheers all karl

if i was to have this fitted to a standard cat back system, would i see any sort of gains in either power or sound? I would have the rest replaced at a later date, its just a chap i know has one he wants to get rid of!

Im going to finish off my exhaust system by getting a downpipe and decat... i already have a milltek non-res cat back...and am looking at getting the milltek downpipe, however have heard problems with it causing the engine light to come on, i presume due to the cat being removed...any one had...

Morning all. I placing PROBEE's K04 turbo into my mk3 cupra, for this i need a custom downpipe. I ve found qpeng.com and they have a K04 to ibiza MK2 conversion downpipe. Will this fit my MK3 ? The hyperlink is...

Im looking at doing a Downpipe on my cabbie. Currently have a Custom CAT back exhaust, nice tone---now i want more power. Removing my CAT is not an option as this is saving my Turbo from going POP! I have Software on my car as well as a K&N filter(with some mods to allow MUCH MORE air...

Just had pipewerx 3" dp fit and revo stage 2, i used to get the (18205) efficiency all the time with the decat, but now i have this... VAG-COM Version: Release 303.1 Control Module Part Number: 1ML 906 032 A Component and/or Version: 1.8l R4/5VT 0001 Software...

I recently got the pipewerx 3" dp and decat, and also had the Revo stage 2 put on, now know theres 2 sensors S1 - closest to turbo S2 - Cat side i have scanned it on vagcom and come out with this VAG-COM Version: Release 303.1 Control Module Part Number: 1ML 906 032 A...