exhaust

  1. Got my exhaust done!

    Finally got the exhaust done on my 1.4 :D car has now got a new voice box no longer is it a quiet and timid animal :D *VIDEO* http://www.youtube.com/watch?v=SosGp_PXxZI&feature=player_embedded
  2. what exhaust?

    evening all, I have fell in love with the noise an r32 makes and i know this is from sheer power and not just exhaust alone. is there any way that i can try and recreate this in a 1.2 ibiza. anyone know of any exhausts which may help me to achieve the desired noise. cheers...
  3. Decat on standard exhaust

    Has anyone replaced the Cat on their LC Mk1 to keep the standard exhaust, if so what does it sound like? Also where can i "consider" getting a replica exhaust to the one i have from a aftermarket source like Miltec etc etc Thanks
  4. uzi_cupra

    Exhaust question

    Looking at getting my exhaust done in the next couple of weeks (before i go for my stage 3 map) but wanted to know what is my best option. had a look at a few places and so far came up with this: (1) custom 2.5" (or 3" but apparently makes no difference) full turbo back (decat too) with a...
  5. Grat

    Exhaust has issuses!

    Hi people was just driving home last night when all of a sudden it sounded like a combine harvester! Had look this morning and it's coming from the back of the engine bay on th passenger side there is what I seem to feel as a threaded hole any ideas what this is? Cheers
  6. thebody

    Exhaust Fumes in Car

    My first post so hi to everyone. Went to look at a Seat Ibiza 16 v gti today. The car wasnt in bad nick little rust but very light. Few of the usual issues Dipstick snapped Passenger side window comes off runners. Also the owner was trying to be crafty and had taken the ABS light out to pass...
  7. lynchy

    blueflame exhaust clamps?

    basically just wondering if you get new clamps with the exhaust? ive ordered my full system and waiting for it to arrive, had a look under car and the clamps are rotten and bound to snap! just so i know whether to get any etc? thanks
  8. elcristoff

    Milltek exhaust users

    Hi guys, Fitted a milltek exhuast (off a mk3 Cupra) to my mk2 and its lovely, just one question though. The rubber mount that connects the main pipe to the car is nowhere near reaching the pipe, did anyone else have these problems? I'm currently running without it but it scrapes along...
  9. Can you mate performance down pipe to a standard exhaust?

    I have totally stock exhaust currently on FL Cupra (single oval exit pipe). I understand that a turbo back exhaust does little for performance so was wondering if you could fit a turbo down pipe to the standard back section? I am looking to go St2+ but if possible, would this be too...
  10. lynchy

    full exhaust system guide? any interest people???

    basically ive got a full exhaust system to fit to my car with decat, downpipe the lot. just wondering if anyone would be iterested in a guide to fitting this or has it been done etc? i know its not a hard job but thought it may help a few people? just before i get my camera out and spend...
  11. seanaldo1987

    turbo bolts loosening & removal of exhaust manifold

    has anyone on here had the typical VAG 1.8t problem with the manifold to turbo bolts loosening and blowing gaskets??? if so what different things have they tried to solve this problem?? also, how easy is it to remove the exhaust manifold as mine is cracked and required removal i've heard a...
  12. Replacement Diesel Cupra Exhaust

    Hi everyone, the rear hanger on the back box of my 04 Diesel Cupra brooke off the other week, I tried a repair by welding it back on, however it has come away again around the weld so it looks like I'll have to replace it. I phoned round various garages and motor factors the other day and...
  13. cherry bomb exhaust + k&n 57i

    :)im lookkin at a cherry bomb exhaust on demon tweeks 2.5inch. im relay likin the look ov it and the sound ov sum youtube vids on it. 2nd im lookin at a k&n 57i induction kit on ebay. iv not got much money as i would go with a miltek or a blueflame. would these be fine my cars got no mods just a...
  14. SalSheikh

    Exhaust Upgraded

    guys, got my old exhaust binned and a new cat back straight through 2.5" s/s pipe and backbox with 6x4" tailpipe put on. All fitted for £225 but my exhaust rubbers are soft as shiite so I have ordered these today and will get these changed asap as the exhaust is knocking cos of this and hanging...
  15. mk2 cupra exhaust on mk3?

    Been offerd a mk2 cupra backbox would it fit on my Mk3 1.4 ?? looks the same all the hangers are in the right place will i need a reducer pipe?? any idea of the size in mm ? cheers.
  16. Random1989

    Ibiza fr exhaust mani

    hi there everyone i have a the petrol fr and need some advise whats the best way to get to the exhaust manifold on the 20vt engine it seems my manifold has come loose.
  17. davidmills2002

    Fmic or exhaust

    currently i'm at stage 1 with just a remap, clutch and pd160 intake. Looking to go slowly to stage 2 as money permits. In a month or so i'll be getting some one that will allow me to either get the front mount or exhaust. Will get the seat sport fmic or milltek decat and cat back system. Both...
  18. MacFever

    Milltek exhaust ?

    Does anyone know if Milltek is developping an exhaust for the new Ibiza and for the FR in particular ?
  19. New Exhaust?

    As you might have gathered from some of my other newbie-asking-questions type posts I am weighing up my various options with improving my Leon. I was looking at getting the bumper colour coded, but at around £500 is a bit out of budget. After giving the car a good clean at the weekend I was...
  20. keirravn

    is this a standard lcr exhaust?

    hey ya'll I polished the exhaust on my LCR a couple of days ago, and I spotted this on top (pic taken after a country drive so excuse the mess ;) Ok sorry I cant figure out how to post a picture, duh! what i was meaning to show is that the exhaust has 'milltek sport' stamped on top of...
SEATCUPRA.NET Forum merchandise