fitment

anyone got a standard bumper that sticks out a little bit to much under the headlight and sits a bit low as mine looks like this after fitting forge fmic although the pipes arnt touching the bumper it just looks slightly out of place. very slightly i must say no one else would notice it just me...

done some searching and think i know the answer but want to amke sure. i've fitted a ko3s turbo so only have one vac pipe to the actuator,the tee piece is left in and then capped off(until i get a couple) but i was wondering can I un cap it, leave the tee piece in and then connect my boost...

Hi, Just a couple of questions..... will this size of rim fit my ibiza sport 8.0x17 ET48 5x100 ?????? also, what made the sport go from 100bhp to 75bhp??? i.e. what changes Cheerz Josh

Hi, Have just got my front splitter (lcr) to fit to my 1.4 sport ibiza (05 plate) How do I fit it as it has come with no instructions obviously? what needs cutting etc? it doesnt have any screws or anything, the part number is 1ML805903 thanx josh

I have done a searchy and only found one thread about this, i put a reply up on it but got nothing back so thought i would do a new one! This should be useful for me and others wanting to fit it ;) I have just bought an LCR Splitter and am looking to fit it on Saturday! I know there is...

Out of interest how long did it take those with a Forge FMIC to fit it? Thinking of doing mine tomorrow but it is essential I have the car up and running by Tuesday!!

Hi, Im buying cupra t's universal intercooler with all the samcos and charge pipe etc etc, just wonderd if anyone has any advice on fitment etc etc???

hi ppeps just picked up my lcr splitter just after advice on how its fitted surely its wider do you need to cut any of???? Cheers in advance Chris

I've just refitted my spare alloy into the boot compartment but having a few problems. Firstly the bolt that goes through the boot floor doesnt quite line up with the alloy bolt hole so I can't get the retaining nut on. Second does the jack just sit in the spare wheel in its cover because its...

im thinking of buying this shortshifter from andyj from the site, but just want to make sure it will fit my 2.0l 16v as it was brought for a mk3 20vt, Its for a cable change box but heres a pic! :) http://i2.photobucket.com/albums/y20/Pugzee206/DSCN0483.jpg

Hello new to the site and have come over from the puntosports site after just selling my gt. just bought a x reg leon cupra & was just having a look under the bonnett and was wondering if the dv was fitted correctly. it does not look,standard as it is silver & it looks like a recirc one. the...

Hey all. well i have got my hands on some MK2.2 (face lift) side skirts and a rear bar and soon hope to get either a Cordoba (if it fits) or cupra front bar. i own a MK2.1 (preface lift) so i was wondering if there are any write ups, guides, step-by-step etc etc on how to fit them...

alr8 lads, i will be buying some aftermarket alloys this week,am i right in thinking that the offset is 38 and pcd 100? what is the max width on the tyre? would 225/45 R17 be ok?its a ibiza 20vt cheers for any info Joe

Can anybody tell me how to make my lupo gti rear wiper work.. i) without the cap popping off every time you use it ii) without the squirter just hitting the cap (even before it pops off) and hense not wetting the screen at all iii) without the plastic arm screaching against the screen...

Ok ive found a set of alloys in 5x100 7.5J X 18" ET 50 fitment, should these fit my toledo ok? or will i need spacers?

I have just bought the spoiler mentioned (from ebay :) ) and i was just wondering whether it will fit onto a pre-facelift 1.4 ibiza. I know im going to have to cut the bolts off because my rear window hasent got the holes for them, but will i be than just able to "glue/stick" it on?? Cheers

Could someone please help me out, have a look at this link --> http://www.motorsportworld.co.uk/ go to the online shop and then find your way into the momo gear knob section, theres two gearknobs that say they are for audi/vw applications, do you think they would fit the seat because they look...