gauge

Hey all, i bought a liquid gauge earlier in the week, when i checked the boost pressure it peaked at 22psi and was averaging around 8 psi, as far as i know my car isn't chipped, and i thought it was ment to be around 12 - 14 psi. Any help would be great. Cheers, James

Another little problem we've had with the Toledo since we've had it is the temp gauge doesn't move much. In fact, during normal driving, it doesn't move at all. If I let it idle with the heater on full and the fans off, it gets up to 90 and stays there. If I drive it, it doesn't move until...

I was wondering why there is a difference between the rr and liquid gauge power and torque outputs. for example the car was stage 1 mapped in june on a hot day, on the rr it came out with 208bhp and 242 lb/ft, the liquid gauge today says 197bhp and 222lb/ft. I have only done approx...

Has anyone tried the VI Monitor Multi Function Gauge? Thinking of getting one, but wanted to see other peoples veiws on it first. cheers.

Hi all, I've been having an intermittent fault with the red warning light on the temperature gauge coming on with the same beep as when the fuel light comes on! It seems to happen on cold starts and if the engine is turned off and back on again then the problem disappears! Its not throwing up...

hi i wonderd if any one can help,my temp gauge on the dash stays at 60 then sometimes goes to 90 then back to 60 anyone know whats up also im not sure if the elec fans are working there is a buzzing noise that stays on for about 5mins when car stops but fans arnt going round.any help be great...

I have baught an auto gauge oil temperature gauge and want to fit it to my 110 tdi. What sender unit will I need and where can it go on the engine?? Also, what pod have you used? Cheers Andy

After some helpfull tips on dash removal also found the boost gauge fitment which is another just job . However I like Auto meter gauge phantom as matches the dials with the red bulb as shown. :think:Does anyone know of any others that look good ??

I think my external temp gauge has gone to tell me the outside tmep etc coz the dial read all zero’s this affects the heating cooling coz I either have full hot or full cold nothing between, in summer not to bad but winter is a pain when windows steam up etc, Im sure ive seen someone selling...

soz to bring up a crap thread guys i orderd a new boost gauge and they sent me a volt gauge any way it has 2 wires coming out of gauge red -to ignition switch 12v + black-battery - can anyway tell me where ignition switch is please many thanks

Done a search but no luck:(. Just fitted a boost/vacum gauge, not sure what is the correct pressure on idle when the car is fully warmed up. the vacum reads from 0-500-750. that in mmHg.

Sorry if this is a daft question.... Going to buy a boost gauge and attatch it somewhere along my n249 bypass. I have seen folk put them in different areas some at the Dv and some at the FPR. Where is best to 'T' it in to the bypass for most accurate reading. Dv, FPR or Manifold? Cheers

right bought a boost gauge and well am stuck lol first pic is a thread but not sure where it goes and the other is where u must put a vac hose of some kind sorry about the bad pics but any help would be good?? cheers

I have an Audi A4 (B7) and like many B7 guys am interested in the Seat Exeo parts. Does anyone here have pictures of the DIS screens in these cars (Driver Information System)? This is the screen between the speedometer and tachometer. My Audi came with a red monochrome screen and I noticed...

Hi people just got my boost gauge for lcr.Went to the garage to get it fitted and they want £45.I thought thats alot so does any one have any pics to show me where i have to cut the hose to fit the t peice in as i dont have a clue.Cheers

hi guys im looking at one of those liquid gauges as my mises is buying it for me for a prezzy lol has anyone on here got one and would recomend one . are they easy to work ect many thanks guys. omly reason i ask is its a lot of money if there poo. do they do complete diagnostics test on our...

hey, i have a day off work today and want to make the most of it so i am running my gauges in. the only problem i have is finding a hole to take them through into the engine compartment?? does anyone no where the hole is or if i can take it through where the loom goes through ( cantsee no space...

Hi there peeps, just wondering if i can t off from the n249 bypass i have done to my lc and connect my boost gauge on to this system?? will it work...... cheers

Afternoon all. Need a bit of advice. Ive bought an A pillar 2 gauge pod, one hole's going to have a boost gauge but i cant decide what to have for the other, either oil temperature or oil pressure! Which do you guys think?

Just a few picy's of something i put together for edition 38 [B)] think its a worlds first on the switch mod too :p It was easy as pie to make too, just a AFR gauge, REVO sps switch a shiny REVO sticker and some carbon fibre courtecy of a local Formula 1 team, lots of wire and some patience...