guide

I was in the process of fitting a new rear diffuser to the car and it became obvious that i would have to remove the bumper to do this. I took a few photos and the rest is wordy but hopefully it will help you if you have to take off yours. HEADS UP - to remove the rear bumper you have to...

Purpose of the Brake ducts is to direct airflow from the front of the car onto the Brake Disks so that if you are doing a lot of braking or track work it helps to keep the brakes at a better temp. I have just been told some of the smaller brake systems may have issues with fowling on the...

Hi Guys & Gals, Today I fitted a strut brace to my Leon. It was real easy to do and took around 15 - 20 minutes. You don't need major mechanical skills to do this, just some tools. The tools I used were: 13mm sockets, 3/8 ratchet, 1/4 inch ratchet, a 1/4 inch driver and a 13mm spanner. Torque...

Hi guys and gals, This is an updated guide for how to fit an oil catch can for your 1.4Tsi engine. This is fairly simple and virtually anyone can do this with minimal tools. If you're wondering whether to bother fitting a catch can, google will explain much better than me, but essentially it...

Hi guys and gals, Just another quick guide for anyone who's been thinking of fitting a polyurethane bush insert to the lower engine mount, also known as the dogbone mount. This mod is quick and easy to do, with minimal tools and skill needed. In total it took me around 15 minutes. What you will...

Hi guys & gals, Here is a how-to to remove your front bumper. This is an easy task and will take around 20 minutes to remove, usually a little less to refit. The tools you will need are: T40 & T25 Torx bits Flat bladed screwdriver To begin with, pop the bonnet. Above the central grill there is...

Hi guys & gals, Got a big one for you today. This guide will show you how you can retrofit fit front parking sensors and enable the Park Pilot function on your Leon. This will be a lengthy guide so be sure to give it a full read first to ensure you can complete the job. This requires some...

Hi guys & gals, A nice simple guide today on how to change your oil & filter at service time. I'll also show how to change the pollen filter. I won't be talking about the air filter as I have a custom one on my car so there's nothing for me to change/clean just yet. Another point to note is...

Hi guys & gals, With the winter months up ahead and the nights starting to draw in, I recently fitted an LED strip to properly light up the boot in the dark. As I work at odd times, I often find myself in the boot at dark hours! This is a simple mod to do and requires a small amount of...

Hi guys & gals Today I will show you how to dismantle and remove the upholstery/covers from the front seats should you need to replace a damage part. I will also show you how to fit heated pads if you are wanting to retrofit heated seating. The heated seating retrofit guide is located here...

Hi guys & gals, Today I'm going to explain how you can fit heated fan jets to your Leon and how to wire them in. These came as part of the 'Winter Pack' but can be wired & coded in with relative ease. This is relatively simple to do, and doesn't require loads of tools. Here is a list of parts &...

Hi guys & gals, Another guide for you today for a convenience feature more than anything. This used to come standard, but then Seat changed it to only come with the 'Winter' pack. However, it can be retrofitted! So I will show you how to do this yourself. For this job you are going to need some...

Hi guys & gals, Got a big retrofit for you all today. I've recently fitted front heated seats to my car and I must say they are brilliant! I'm very happy with the results, so I've created this guide to explain exactly how to fit this yourself. The overall difficulty isn't huge, there are tricky...

Here's a quick removal guide for removing the front bumper for the MK3 Leon in photo form. Let me know what you think! Any questions? Ask away...

Time: 10 minutes each side Level: Easy with care Parts: 17mm Hex Drain Plug Key or equivalent and suitable socket and bars Protective cloth Two polarity sensing BAUs21W (offset pins) LEDs. These are needed because unusually the centre pin on the bulb holder is negative. The can is...

I decided not to order the £250 comfort pack as only wanted auto lights and ACC in terms of options. Realised I could buy an auto light kit off eBay for £25 for a Golf mk7/Octavia 2015, which we all know are the same as the MKIII Leon...

Installing LED footwell lights on Seat Ibiza Cupra These are the LED's I will be using: I picked them up off of Amazon for quite cheap but I know they are a decent quality. I've already run the wiring in on the passenger side it looks like this: Step 1 - Remove the fuse for the interior...

Ok guys and girls, welcome to my guide to fit a universal type intercooler to your mk5 cupra,Boc ,fr. My car is a facelift mk5 so there maybe some small differences but nothing major. You need 550x140x65mm intercooler 2x 90* bends with 57mm internal diameter 2x 57mm alloy joiners 4x 60-70...

What is it? The W8 light is an interior dome light that was fitted to the Passat W8 and some other VAG models. The main advantage it offers is backlit buttons, and ambient red LEDs that shine on the centre console, nice for adding a bit of class to the Ibiza. The W8 light contains 4 W5W bulbs...

I have knocked up a quick guide here, sorry for the poor pics and its basic look but should help you out should you want to remove the door trim. Before you start be aware this is quite tricky so take your time and think things through, last thing you want is a broken door glass or a locked door...