guide

[/IMG] Tools: - 1 Drill - One pencil - 5 screws (provided with armrest) - 1 star head screw driver How to: - Place armrest in position, it only rests properly in one place so you cant mess it up - It will rest over the Aux-in (green mark) - Next mark at the red with a pencil a...

Just been looking on the awesome gti site as im looking at getting a liquid gauge. Iv done a search on here but there is a lack of pics. Can any one tell me the best way to run the OBD cable to the port. Even better if anyone has a few pics to show

This is just a quick guide to assist in the fitting of the mk3 Cupra Wheel to a Ibiza/Cordoba. I didnt take many pics whilst fitting but can advise you of the main key points to ensure it doesnt end up costing you more than you anticipated. 1. disconnect battery and leave for about 20 mins to...

i'm going to tackle my 312mm conversion this week on my TDI (weather permitting ov course!) I've got the following:- Brembo MAX discs Ferodo DS2500 pads VAG 312mm Carriers + pins + seals A couple spare bleed nipples Copper grease Wire brush Caliper rewind tool Things to still get:- Goodridge...

hello all, i'm going to chnage the top strut mounts on my Leon fr tdi mk 1 this weekend and was wondering if anyone has a step by step guide to this or could poin tme in the direction of one. I've got a pretty good odea how too do it and have spring compressors. Just wondering if there's...

Is there a step by step guide for the above, please? Also, where is the fuel filter on a 2008 Leon Cupra?

At first this can seem like quite a PITA, but it is actually a fairly simple job if you take your time... 1). The day before (or at least give it some time) spray some WD40 on the three bolts and the metal prong that goes into the dipstick tube. Two bolts are at the front and hold on a black...

CANT FIND ONE SO ANY ONE ABLE TO HELP HERE A START PIC OF CARBOINIO ON GTTDI GOLF

Hi Guys, I know this has likely been asked before, and I have searched and seen the youtube video, but is there a guide with stil photos anywhere for a Seat Sport FMIC? Many Thanks.

After some research I decided to get a DIY parking sensor kit (£18 from ebay). Obviously its the most basic version, but should hopefully be good enough for me :blink: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190322960277&ssPageName=STRK:MEWNX:IT I have searched the forum and...

Hey, Could someone send me a link to the best guide for fitting coilovers please? Thanks.

Anyone seen a guide for taking off the front bumper on a K1?.

After spending loads of time looking at various forums, threads and the ross tech website, i have put together a list of the most common things that can be changed and how to do them. This is just for easy to reference as everything is in one place. If you break your car doing any of these...

Hi guys, just looking for a fitting guide for the BMC CDA as i cant find one using the search button. Had a look at fitting mine tonight but noticed the sensor is part of the standard airbox and not sure how to attach the sensor to the new BMC, any tips/advice appreciated. Cheers

Hi guys didnt get a owners manual with my mk2 Ibiza GTI 2ltr 16v I was wondering if anyone has the diagram explanining what fuses are where and where even the fuse box is. I need to change my stereo/radio one but havent a clue where to start Thanks alot Chris

Hi, I’ve just ordered a silicone tip and was wondering if there is a fitting guide to help me install it. It looks like a straight forward swap but reading past threads some find it simple, and some have a bit of struggle including shredding hands, etc. Since I’ve not done this before, I...

ive done a search for a buying guide but cant find anything.im after the 1.9 tdi pd engine one.2000 plus can anyone let me know what to look out for cheers

Hi All, I want to replace the suspension on my toledo V5 but I was wondering if there is a how to guide knocking around here before I start? Cheers Alex

hi guys, can anyone help with a guide on replacing track rod ends steering feels alittle loose, want to replace a dodgy cv joint and track rod ends. afaik the rod ends have been on car for 90k so are overdue. cv joint im okay with, done a few before, never done a track rod end. parts...

Hey chaps, finally got myself one of these units, does anyone have a copy of the user guide in pdf format they would be kind enough to email, google has failed to find me one!!