head

  1. Graphical (multimedia) Head Units - Worth the money?

    Hi guys, I'm also looking at my options, selecting a new Head Unit for my Mk2 Leon. I'm drawn to the HU's that have the graphical display, that you can watch music videos or other multimedia content on, or even a rear facing CAM. They are mostly touch screen, and you navigate their...
  2. lawrieIbizaMk4

    :help: help getting a permanent feed to head unit ibiza mk4

    hi can any1 give me advice on how to get a permanent feed to my Pioneer head unit? at the moment it won't remember the last track played etc, it's not too urgent but it is getting annoying overtime having to turn the sub down etc or program in radio stations every time i get in the car. cheers
  3. New head gasket, do I *have* to replace the head bolts?

    Just like it says, do I actually need to replace the head bolts when I change the head gasket. Haynes Book of Lies says yes but I thought that was only for stretched bolts in high performance engines. The 1.4 APQ is a poky little thing but high performance it ain't! :D Basically, the gasket...
  4. help !!!going to retro fit sub amp feed from my standard head uint

    seat leon mk1 right i have all the bits required and know where to put all cables just iv been searching for the picture i have seen of the labeled hu (head unit) rear connection plug for the speakers for a couple of days and im getting no where with it as want to do the mods this weekend...
  5. Do all Alana Head Units Play MP3's CDr/CDRW

    Hello Aplogies if this is a duplicate post but Ive scanned a few pages on here and cannot find the answer I have a 52 plate Toledo SE with Aura headunit and stock cd changer I have been looking on ebay at the Alana head unit and I just want to know if all the Alana headunit play mp3...
  6. feeding vac through bulk head ?

    hi guys ive been trying to source this out for ages . puting vac through bulkhead as mine is currently going through door/wing ect . reason is i dont trust myself with water going through vac pipes as im using washer bottle in boot. and dont want it bursting on wires ect[:@]. many thanks guys
  7. head light tinting

    has anybody managed to tint there plastic head light covers on there cupra yet and if so what spray and where to buy or any picsof your handy work
  8. HELP!!! water temp gauge going from normal temp to not registering. thermostat, head

    hi guys i need some help. my 1.8T leon's water temp gauge all of a sudden doesnt read anything then occassionally it'll read normal operating temperature (mid range on gauge) then if i take a corner it drops back down to not reading anything. i thought it could just be the thermostat to start...
  9. VAG Diesels Rul

    aura head unit stuff!!!

    Hi., I have been looking to change my aura favtory head unit to a sony head unit that allows me to play my ipod but I have just found this, http://www.dynamicsounds.co.uk/connects-ctvstx001-seat-ibiza-leon-input-adapter-interface-p-8762.html It looks like it will do the job but before I...
  10. VAG Diesels Rul

    head unit change

    I have got a standard aura head unit with a 6 disc cd changer and I want to change it for a sony head unit.Is there adaptors I can get so i can connect the cars connectors to the new sony head unit as they don't match up. Any info would be greatly appreciated.Thanks
  11. Is the standard radio head unit attached to the under tray?

    Hi there, Im getting a 7" in car DVD touch screen system for my 2004 SEAT ibiza 1.4 that replaces for old standard radio. I have spoke to Halfords and they said yes, it will fit with a harness adapter for an extra £12 which is all good. BUT, they did say if the radio unit is attached to the tray...
  12. Oem Head Unit/Multi Changer?

    Hi Guys Could anyone tell me what make/model headunit my Ibiza Gti 8v would have as standard?? And also make/model of optional cd changer I know there are loads of better aftermarket units but i`d like to have it original Many thanks Adrian P.s Shoot me a pm if anyone has the...
  13. Cleaning a PD TDI cylinder head - can I use wet/dry?

    Just needing to clean a new head I got and remove the old gasket seal residue and a little carbon. Will 2500 wet/dry be okay without causing any damage to the mating face? Thanks
  14. Alpine head unit losing settings

    Hi guys, i've got my Alpine CDE 9882ri head unit all fitting and working, but everytime i turn the ignition off i lose all my settings. Any one know how i sort the problem?
  15. Central locking is doing my head in !

    I have finally managed to sync my central locking system, but this has turned out to be a pain in the arse ! Now everytime i go to lock the car the central locking locks and then unlocks itself, it just will not stay locked, weather i use the key in the door method or the remote. Also when...
  16. 8bit

    iPod compatible head unit suggestions - LCR225

    Hi all, Got the single-CD version of the Aura head unit in my LCR225. Want to replace it with something that I can plug my iPod into (1st generation Nano at the moment, may upgrade to newer Nano, Touch or Classic soon). In my old Punto I had a cheap-as-chips Ripspeed unit, the iPod...
  17. LCR stock head unit-i-pod?

    Iv just got myself a LCR its got the stock head unit with 6 disc changer i wanted to know is it possible to connect my i-pod touch to it in anyway? if so what do i need Cheers J
  18. Removing Aura Head Unit

    Hi Ive bought the keys from halfords, ive bought the european ones, i dont know where to put them in the head unit as it doesnt have any holes, its a cupra r and im tryin to fit a cd changer cheers
  19. BXE head fit an ASZ bottom end? Anyone know?

    I've heard it's the new code for the older BKC engine but i'm only interested in the cylinder head and if it'll fit onto an ASZ lump, obviously after changing the injectors over. I know the BKC will fit but i'm not sure if the BXE head is exactly the same as it's a newer code and might have...
  20. Twin head light question

    I have atwin headlight conversion on a cordoba but one of the headlight lenses is smashed. I know nothing about these so can someone recommend if replacement parts be sourced individually or should the whole lot just be binned ? cheers Mark