heads

I'm considering a ported and polished head conversion and a remap from tsr performance. My lcr 225 is standerd (other than the s3 upper strut brace) at the mo and the only thing i was going to do was a cc or p tourque re map and a forge diverter valve, but a mate had his done on a 2ltr mk2 golf...

Hello there!! I'm having a bit of a resource crisis and have come over here to ask a question. My girlfriend is looking at buying a 54reg Fiat Stilo 1.9tdi. But (apparently) the garage took the car out for a spin and ran it out of diesel. So they have taken it to a garage to sort it out. But...

Details here if you are interested - http://www.mk5golfgti.co.uk/forum/index.php?topic=7037.0

Tuesday the temp gauge warning flashed and beeped but the temp was fine so stop at first garage and the water in the expansion bottle had dropped. Water below rad so thats the fault, no biggy and its being sorted tomorrow with a new rad funnily enough (core leaking, no damage - corrosion)...

right , ive been looking into tuning my 8v cupra , heard through the grapevine that a mk4 golf 2.0 8v head will fit on my block , and that because these have forward facing inlets are therefore better for carbs , has anyone got any experiance of fitting one of thses heads to an ibiza ? , also...

just to stop people wasting their time (like i did today[:@]) DO NOT believe this guy when he tells you that it only has a scratch in the passenger door that will polish out and a small dent in the front passenger wing! the door wouldn't polish out if you had a month of sundays! the front...

anyone know who owns this car http://www.pistonheads.com/sales/159823.htm

Hey all, The screws in the front part of my engine bay are all getting really "rusty" - going a nasty brown/white/green colour. In particular, the torq screws in the top of the headlights. Whats the best way to go about cleaning these? I could remove them, and rub them down, but i have a...

ok so I've been to seat and picked up some different parts but can't get them to come together so I'm going to make my own up. Can I do this with samco's? Also do I need to fit one way valves in there along the way or no? If I do then do they have to "arrow" in the direction of the servo...

Well ours seems to :rolleyes: , on several occasions over the last few days the rear of our FR seems to act like a magnet for 'go faster' boys. Last night whilst picking my youngest daughter up from TGI Fridays we had more than unwelcome attention from much 'modified' Nova, Fiesta and Focus...

read this and weep.......:lol: http://www.americanlemans.com/News/Article.aspx?ID=1885 I rest my black and sooty case...:funk: