hose

Hi. I got problem with my ALHAMBRA 2.0 TDI ecomotive. , engine code CFGB 170 BH. At first radiator fan was running about 5 min after driving looks like dpf regeneration? But that was for about 4 weeks many more not sure. Took it to garage come out with faut codes that would be p0406, p245200...

I have MK1 Cupra R Brembo calipers. On one the metal pipe is corroded. I need to get a new one of these pipes or get a custom braided hose that would replace the metal pipe. I was looking at getting custom brake lines made but don't know what fittings I need on each side of the braided hoses.

I've done my stage 1 with APR and i've been told to avoid the hose collapsing i should install an aftermarket TIP ... which i plan on doing. The question is do i actually get any HP gains from installing one? Cheers

So i am looking at different things to do to my leon this month as i have about £125 to play with, i did think about the Forge 007p for a while and i have more recently thought about buying a Samco / Forge hose kit for the LC. Which hose kit will be best to buy for the LC for when i have a...

hi all. does any one know were i can get 2 new hoses. im talking about the hose from the charge pipe to the dump valve. also the smaller hose from the charge pipe to the n75 valve. its for a lcr. also forgot to say do the older type tips for the audi tt 225 fit? thank you all

Noticed a while ago that connected to the actuator is a black hose but mine is just hanging and has a screw/bolt in the end of it blocking it off Can anyone tell me what the hose should/would have been connected to? The N249, N112 and SAI have all been removed by previous owner is it...

the above hoses, i want to replace and the dv to charge pipe hose is kinked round since fitting fmic are these just vac lines and can the be replaced with vacuum hose only? reason i ask is because silicone will just kink round too much again, and vac hose will bend better in a longer length...

I have searched vagcat and here and either my search string is pants or its not listed. Can anyone tell me what the pipe coming of the inlet mani is for and the internal diameter, i am thinging of replacing it with some shiny braided hose with some nice finishers on it?

Is there a hose available to renew the oe hose between the charge pipe and the DV,have just checked mine and it feels quite soft,is there any pressure through these that would make it not work to its optimum:confused:

Just a quick question Thinking of getting one of these new t.i.p Silicone hose is the bam same as the amk engines or the 225bhp same as the 210bhp or are they different pipes.:confused:

I'm about to buy a TIP and i'm thinking of buying the 5 piece turbo hose kit too, my questios are 1) apart from making the engine bay a bit better looking are there any benefits from having these pipes in silicone because the oem ones are quite thick 2) the small section of the 5 piece is...

Bit of help identifying what hose i need... Just fitted new TIP, and have noticed one of the hoses has perished as is completley... "squashy!" Its the one that runs into the underside of the TIP, about 85mm in circumfrance. Bit vauge sorry, but its pitch black, and snowing, and i just...

I'm getting my tt calipers fitted this weekend and just wanted to check that you can definatly use the exsisting brake hoses as I've heard there a little short, only I don't want my car stripped of itsbrakes only to find the originals are to short. Can a few people confirm that u can use the...

On the drive to work, my car was running 100% spot on, on the journey home however was almost undriveable! It refused to go above 0.2 bar, and when you tried (even under normal acceleration) it violently would try to stall, a loud pop from the exhaust. It seems to tick over fine, but when...

Obviously i know where the hoses go for the dump valve, n75 and throttle body to ic, but what about the other 2? Pancake pipe Turbo outlet (think this is the 90 degree bend one?) Any help appreciated

Was looking in my engine bay earlier and noticed this I'm guessing this isn't supposed to be like this. if your unsure what it is it's the breather hose just where the intake pipe would be for the air box

any 1 changed the 90 degrees pipe between the charge pipe and turbo.if you have have you noticed any difference.cos i was looking today and its very poor and can be pushed in very easy:(

Just a quick question Im in the process of buying all my parts for my cold side relocation I know the dump valve connections are 25mm My friend has a metre of flex hose which is the wire reinforced stuff he said i could have for free but its 28mm would 28mm hose work if it was...

does any 1 no if you can buy different colour hose clamps:(and were to get them been on loads sites and carnt find any:(

Hi Guys, Been having a slight problem with boost for a week or 2 and have been over all my hoses and double checked since I fitted my THS boost hose kit, to check that fitting the new hoses hadn't caused the problem. Found a split on the Y-shaped PCV/ Breather hose and think this could be...