hose

Hi ive looked loads on this on here and cant find it.I want to do the n249 bypass but not sure what size vacum hose i need and where to get it from.Any help would be great.Thanks

Was driving earlier and noticed my car sounded like it had 500bhp lol noticed the vacuum hose going from the boost pipe to the n75 has a huge split and has come off the boost pipe but the car seems to run ok and is boosting as normal which suprises me as it sounds like a huge boost leak...

Hello, After a bit of help with my Turbo Hose Kit i got.... I got a kit from ebay THS kit at a very good price, went to the garage to get my plugs done and the hoses put on! Now, the guy fitted the Main hose from the throttle body to the inter-cooler, and the breather pipe i think it...

Does anyone have a part number for the o-rings used in sealing the intercooler hoses? Would be a great help if you do cos my SEAT garage are :censored:

What is the hose labelled with the red arrow called ? Can I get this from forge to match the other large diameter hoses ? Is it easy to replace? I just want it to match the others :lol: Thanks guys

Hiya guys, i need some help. My turbo breather pipe has a really nasty split and there is a huge boost leak which is ruining the performance on my car real bad. Im after a nice solid silicone hose upgrade for that part but not too sure where to source it from. I had a look on ebay but theres...

can anyone tell me where the elbow in forges 5 piece silicone boost hose kit goes? I've sussed out the other 4 and just unsure of the 90 deg elbow's location. (is it under the bonnet or inside the wing with the IC piping?) cheers guys for any help.

Hi, if someone could help it would be great, fitted a f.m.i and the top left hose (lcr) keeps popping off. I have tried wrapping the tape you get at the bottom of a tennis racket around it to make it more grippy, didn't work, I have tried fitting two jubilee clips and if I go over 20psi for more...

hi all. despratly need some advice. i have purchased some goodridge hoses. that are apparently for my car. i own a 51 plate cupra R (which is now currently in bits) but upon fitting them they dont even match up. the originals have a 90 degree elbow on them these are just a straight union. and...

Hi, Been having a few issues with my lcr since the AmD rr day, been advised by quite a few people that the hose that runs from the metal charge pipe to the dump valve is really soft(really really soft), Just wondering if that would have an effect on boosting as the car is defo not running like...

Hi Guys Where abouts is the best and easiest place to connect my boost gauge hose to? Does any one have any pics of the location they have used as not overly mechanically mind !! Cheers Duncan

What's the best product to use to remove dirt from them and restore to new?

Hi Guys, i bought a SFS hose (part number AH30) a while ago, only just round to fitting today..... I thought this pipe was to replace the small flexi plastic from the MAF to the solid air--intake plastic bit..... Its too long and has a 45 deg bend half way down.........where does this...

I'm looking to replace the 90 degree elbow that comes off of the inlet manifold and onto the brake servo hose which I'm led to believe is 12mm but Forge only list 11 and 13mm elbows? What has everyone else used to replace this? Is it ok to use a 13?

Hi , I noticed a split hose in my car ... Can someone help me identifying it ?? It's the one circled in the attached picture, going down below. It joins into another hose (which is ok) at the top.

Hi, tried my rear washer earlier.. no fluid's getting to the wiper.. it's dripping out under the chassis somewhere under the passenger footwell, obviously the hose has come off a connection somewhere.. but i've no idea if it's easy to re-connect.. cheers

Decided to bleed my brakes today. Bought an Eezibleed and 500ml dot4 fluid. Bled the rear brakes and went onto the front. The nearside was really stiff, so I scraped around it to free it up, still wouldn't budge.[:@] I knew I shouldn't have, but I got my trusty torque wrench out and gave the...

Just a quicky ladies and gents, I have just changed my tip and have upper boost hoses on order but need to know the size/diameter of the hose that is the elbow from I think the charge pipe to turbo. For the Mk1 Leon R Thanks

ok i fitted my sfs turbo to pancake hose a month or two ago and all seemed to be fine!! i was out today and realise that i had a boost leak now i though that this was just a pipe popping off but oh no to my horror i realised the pipe has actually blown a hole into itsself and peeled the...

just noticed last night that i had a bit of oil gathering on the outside of the hose tht connects the too intercoolers together,any ideas??,cheers gaz