hose

Can anyone tell me the size of the two silicone hoses that go from the top of the charge pipe and down to the DV as im looking at changing them?

I'd like to find an alternative supplier to Forge for the upper boost hoses on an LCR, can anyone recommend someone where the pipes fit correctly? Not knocking Forge at all, they have been great with regard to their cutomer service, but I might have to wait up to 2 months to get the...

Have fitted my THS boost hoses the turbo to intercooler is fine but manifold to intercooler does not seem to fit flush on to the intercooler on the underside of the pipe when u run/ feel with your fingers and when I have been driving has slipped off. Grrrrrrrrr just asking if anyone else...

Hi, Ive got an autometre gauge and dont want to use the supplied hard hose. What hose is recommended to replace it and how have you connected it to the gauges threaded sensor? cheers

Hi guys. I was having a poke and prod about my engine yesterday, just to check over hoses, and found one had split! It starts at the top of the throttle body, goes up towards the head, under the plastic cover, through a non-return valve, and up to a T-piece at the top of the bay. One end...

Anyone know if this would be suitable to use for the inlet to an oil catch tank? http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=380119416953

hi had a look at the kit forge offer for 1.8t can any one list what the pipes replace i.e intercooler pipe ect.

does anyone no what size silcon hose i need to buy to do a n249 by pass ??? is 3mm ok 0r 4mm or 6mm help please does anyone have a ( before and after photo of the mod???:)

Hi, Just noticed that I have a hose split just at the back of my engine bay next to the rear of the cover on my LCR. So looks like it is an excuse to get a decent set of hoses. Anyone know what hose this is or called ? And what decent hose kit it may come with? Thanks

What...a...day, I've had! Granted, I'm still alive but compared to a normal day this was pretty bad! Last night on the way home I noticed a wooshing noise in time with the turbo, but much louder than normal. Thought little of it, got home. Then, this morning, got in and started on my way to...

Hello Boys and Girls I have been in talks with the lovely people at Forge and ask them about producing a hose kit for the Leon Cupra Tdi. I need to know who else would be interested in this so we can take the next step! Please add your name to the list below :) 1.Pacey

recently done the n249 bypass and have about 2.5m of hose left. what can i use this up on? other vac hoses i assume but how do i tell what are the vac hoses. if it can be used to replace anything else then feel free to let me know. thanks

Hi, I'm finding brake hoses for my Seat Ibiza Cupra and I've found in ebay this... h**p://cgi.ebay.es/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=360136421821 The seller told me that would fit to the Cupra... Could this fit to my car? If not, where I can buy brake hoses...

hi there can any 1 tell me if you can get a samco or such like replacment pipe for the breather pipe shown below

Hi people, I was just under my bonnet cleaning the engine bay and underneath the engine cover when to my horror i found a huge tear in one of the hoses which is located underneath the engine cover. It is a hose which is located just to the right of the 4th coil pack(the one which has an...

Hi everyone, the hose/pipe that connects to my throttle bodie has a split in it and I cant find the part number for it anywhere. I was wondering if anyone knew it? Feel like a bit of a retard cos i'm always asking daft questions on here! Cheers Adam

there is a black rubber hose going from the middle of intake manifold, down side( arrow 1) to the engine( arrow 2)... mine was completely cut and i was loosing boost thru that hose...i took off the destroyed hose and blocked its hole on the intake manifold so now it boosts fine...what is that...

I was sorting out the seals on my 04 Leon Cupra Tdi last night & when i removed the one from the Turbo, I noticed the the aperture in the hose eye is not the full width of the hose itself, It is probably only 1 Inch in Diameter when the hose in nearer 2 Inches. This has surely got to be a flow...

I have called SEAT UK and they deny that my 01 1.8 20VT Cupra was meant to be recalled. It has split at the opposite end to the brake servo. Is this something I would need specialist equipment or can I just take jubilee clips off and bang on a new one? Cheers

Hi Guys, As i've mentionned on here before, my Brembo's are pretty pants to say the least (cant even get ABS to kick in) and reading numerous threads on here has lead me to believe its most likely a lack of servo assist that is causing the problems. Although the brake servo hose has no...