hose

done a search but must be looking in the wrong place :) where is the best place to get one and what is the best size of hose:shrug:

The Crankcase hose is split badly on my ibiza, does anyone know the part number, preferably straight from VW as there is a vw dealer two mins away! Or online equivalent if there is one. My engine is the 2.0 8v, 2E code, basically its the hose that goes into the square plastic box on top of the...

Found here (top option) http://www.samcosport.com/uk/car_kits.asp?make=Seat Has anyone bought the kit? What pipes come with it? It just says that it comes with 4 :confused: Thanks, Marcus

i have tried search but none of the results dont seem to give one answer do i need 3 or 4 mm hose? just my vac to dv wont fit with the forge dv :ban:

anyone got the THS tip, http://cgi.ebay.co.uk/THS-Silicone-Intake-2000-Audi-TT-225-S3-Leon-Cupra-R_W0QQitemZ370126915915QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item370126915915&_trksid=p3286.c0.m14&_trkparms=72%3A1301%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318 just want to know...

hi i have seat leon 4 and i want to change all the vacuum tubes to a silicone . i found this products - http://stores.ebay.co.uk/ZENARacing_W0QQfsubZ3544148QQtZkm but i dont know what the mm i need ? tnx

Ok so the cupra is at Portsmouth Audi, and i just cant beleive the problem. It has a split boost hose coming out of the intercooler. now the car has got a forge SMIC using the original standard hoses, and Audi dont have any hoses resembling it, and also samco are saying it will take over 2...

I know this has been asked before and I've found some vague pictures. But I just had a look for the grommit that goes from the engine bay into the car and can't really find it! I can see some wires going into the car downwards just behind the passenger-side suspension strut but even if that's...

anyone that can quickly tell me what size the hose is coming off the chargepipe (front side of car) running to the plastic tubing going to intercooler? I believe its 45 degree bend? When I search I keep finding the hose on the backside of the chargepipe running to turbo... cheers

hi guys :) sorry for the thread, the search-function won't help me... im searchin for a silicon pipe that connects to the throttle body on our mk3 beezas :( on the forge homepage i only found one for the mk4 and this kit for the 1.8t 150 ps enginges: FMKT006 is the pipe @ this kit, and will...

What size to go for from Forge? Fitted my boost gauge last weekend and realised mine are pretty shamby! Thanks.

This is probably a long shot, but I don't suppose anybody here can help identify a vacuum hose for me can they?! :-o I'm after the part number or suggestions for alternatives... The hose runs from the underside of the inlet manifold (the right-hand one of two hoses, the left one being alongside...

does anyone know the hose size and angle for the forge fmic silicone hose which does on the end of the inlet manifold? cheers ..

Was wondering if you lot could help me out here,should've done something bout this along time ago but I completly forgot. Ages ago when I was putting oil in the beezer I noticed one of my hoses has quite a large split in it,don't really notice anything different when driving at all,but...

I was driving my Cordoba 130 up a hill in 4th gear I put my foot down and there was a pop and virtually no power and a load of grey/brown smoke. I stopped looked under the bonnet, all the hoses on top of the engine were intact, but I could just see the bottom intercooler hose was blown off...

Im going to be ordering a 45deg elbow from forge this week so i thought i mayaswell get the hose that joins the charge pipe to the turbo, just wondering if anybody knows the size of the hose that i will need to get. Its connecting to a silinced k03s. I would have measured it myself but the...

Hi folks, had a prang in my Leon, and damaged the aircon condensor. Garage has managed to get the condensor, but Seat cant give a date on one of the hoses turning up - could be WEEKS apparently!!! Anyone know where I can source one of these any faster? VW or Audi maybe? I've got the...

Hi All, Can anybody explain the function of the small hose on the DV? I guess it opens the DV a the correct time to reduce boost, doesn't it only do this upon closing the throttle or at other times as well i.e underload?

I have posted this on the modification section but no replies yet Where can I get the same hose that comes with the BMC CDA kit (80mm) I'm looking for about 1 1/2 metres Cheers

the other night while under full boost my car suddenly sounded like a pressure washer gone mad, Turns out i have blown the small pipe that runs from the charge pipe to the recirculating valve (oo7) , i spoke to seat direct about this to get a replacement and it appears they don't do one? can...