intake

Hi! I've just got myself a 2014 1.4tsi (140bhp) Leon FR. I've noticed that the engine bay get very, very hot! So hot that I can barely touch the bonnet stand after a drive. Firstly, is this normal?? The gauges I can check in the car are all reading fine (water sits at 90 and oil temp is low...

For the life of me I can’t find this part anywhere or part number wonder if anyone could help it’s the securing clip on the air intake on the Ibiza cupra. Thanks

Hi guys, I am looking at putting a K&N 69-9756TFK Typhoon Intake system into my Seat Leon Mk2 2011 2.0l TDI, but not sure if this will be worth it or whether there are any cheaper / better options to go with. Any ideas? Just had a stage 1 remap to 185bhp - 393nm torque as well. thanks

Hi all, sadly my Cupra has gone back to the lease company and been replaced with a 3 series oil burner! I've decided to sell the bits I had fitted to mine for somebody else's enjoyment, and thought I'd try here before the dreaded 'bay. The parts have only been fitted for 2 years, and have...

Thinking about getting a new induction kit for my seat Ibiza formula sport 2007 Currently got a k&n kit on there Anyone had any experience with the Piper cross kit ? https://www.demon-tweeks.com/uk/pipercross-viper-induction-kit-p-cvfc325s/ Or any other recommendations? Also looking for a cat...

Greetings, until how much HP does the stock air intake on the Cupra MK2 become restrictive? Can it handle 300hp@ crank without having to go for some aftermarket ones?

I have a friend with a 2016 Golf R that has a R600 intake fitted to it, he is getting rid of the Golf R and is going to sell the R600 intake. Would the intake fit straight on to my MY19 Cupra?

Hi guys, I’ve got a 2016 Leon Cupra 290 Manual. I’m wanting an induction kit that makes good intake noise and that won’t restrict airflow when I take it to stage 1; around 370bhp ish. If anyone has any suggestions or experience with good intakes hit me up! Cheers Brandon

What induction kit would people recommend for the cupra 290 dsg, want some induction noise when I let off the throttle. Any videos?

I cant make my mind up between the R600 intake or the cup edition intake, the R600 is enclosed and the cup edition is open but Racingline claim there is a minimal power difference between the two so I would like to know everybody else's opinion please.

I started off with some research on the net which revealed such systems have been used since quite some time back. The poplularity of doing such a mod fell away after the introduction of WMI kits though. I have never been a fan of WMI after hearing and reading too many bad things. Im not saying...

hi I have the itg ko4 version intake fitted to my car at present, but notice that there doesn't seem to be a good feed of cold air as the heat sheild is now boxed from the original intake area. Has anyone fitted a cold air feed hose from the fog light area to the filter ? If so any diy...

hi im goin to experiment in creating a new intake next week as i have time off and access to a rr free of charge so i shall keep you posted on the results as it is much cheaper the the 160 intake and it also looks oem but is it possible to have to much air being sucked in or is it a case of the...

Having spending the last few days reviewing air intakes i'm completely non the wiser on which one to go for. From what I've read a stage 1 LCR is best on a uprated panel filter using OEM airbox? However, there will be no negatives from getting rid of the stock airbox for a induction kit...

First off, sorry for another thread about installing an intake after a remap. I've had a search but haven't seen anything about my query. Having read a recent thread about installing an intake with stage 1 revo I am a little confused. I've been told that when you put in an intake to...

basically im very interested in an intake for my cupra but ive just got some query's before i go and buy one. i seen in an earlier thread that an itg can give 30hp gain on a standard car now what would the gains be on a mapped car as im at stage 1 at the moment and how much would an intake...

I need some high quality ducting, as I will be removing one of my fog lights, and using it to fee extra cool air to my ITG! Does anyone know where or any links that they sell high quality and durable ducting? Cheers.

I decided to spend a few bucks... Which one do you guys recommend ? God Bless

Hi folks, away to change my dbilas for a full 3" air intake but the only one i can seem to find is the VF engineering intake from regal... http://www.vf-accessories.com/acc-airintake_vw20t.php anyone got any idea where i can get a full length 3" intake from thanks

Anyone out there using a Cold Air feed? Other than the standard. When I had my car modified they kept hold of the Airbox and Intake otherwise I would of used the standard air intake and ran some ducting to the airbox. Basically I run the Aero front bumper, However I imagine this issue will...