jetex

Just fitted the Jetex/elbow combo, what a difference btw! but what do you do with the corregated hose that came of the airbox as its just sat there now attached to nothing? cheers

hi all been reading some threads about induction kits and it sounds like jetex open cone filter is about the best has anyone got a part number, and where is the best place to get one, its for cupra 180

Hi just gone out to attempt fit my new jetex induction kit.I already have a pipercross one that came on the car when i bought it. Just wondering as there is some tubing that comes of the pipercross that leads to the engine block,maybe another air passage.Would it be safe to just remove the...

Hello sorry I'm at work so quite restricted does anyone know this part number and a good distributor I could ring as can't really use web at the moment Iv just ordered my air flow meter but everyone asks for the engine code for the filter

what size should i go or on my cupra 180? i know its 70mm but what length fits best? also where is the best place to buy one? and will i only need the filter and nothing else? thanks again

been looking into getting a cone filter these seem to be the best ones are they hard to fit ? and what would i need to fit it ? is it a case of removing the airbox and clamping this one in place ? has anyone had any problems with them ? i have searched jetex cone filter guide couldent...

Ok chaps thinking about either a jetex or blueflame 6x4 oval for my LC. If anyone has one of these and has some really good pics and info please add a post, don't mean to be rude to the LCR chaps but LC pic's only as blueflame have none on their site :(

hi when fitting a Jetex Conical Filter what do you do with the hose of the old filter plastic box,the one neariest the battery,does it need a filter on it?.its a mk3 ibiza cupra.Thanks

I'm considering getting one of these, the price is'nt bad and the blue will compliment my engine bay. Any thoughts, advice, pictures would be appreciated.

Searched through the other Induction kit threads for the jetex and noticed that Robbies C quotes a 70mm part number ER-7005 but.... Looking through the other threads people are quoting a 75mm neck size for the filter part number ER-07505. So before i get slated heavily, i have used the...

Heard a couple of bad things from Jetex's delivery times, so thought id put a post up about my cracking service! Ordered a filter yesterday around 1pm. Arrived at my door 10am!!

Hi all, I fitted a Jetex filter with a jabbasport heatshield at the weekend, i am very pleased with end result as it feels a lot more responsive and sounds alot deeper and nicer. Also make a few whoosy noises:D. Previously ihad a smoothed airbox with green cotton panel filter. For the...

Im looking at using a CAI off ebay that a few people off here are using, as i have been researching i have found that people generally use it with a jetex filter. The question is what size jetex filter can i use (i.e. the biggest possible one that fits in the wing) I know it has a 70mm neck...

Hey folks! Im back to the MK4 Ibiza now, a whirlwind romance of a Mk3 Cupra, then a Mk4Cupra, then a MK3 Cupra, now another MK4 Cupra! :lol: Anyway! First thing for me to do is to sort out the airbox, on the MK3's, Jetex was the one to have... I've searched on this section but only ever seen...

Hi everyone. Right 80% of people with ibizas have the jetex filter.....or there abouts, so i thought id do the same and trade in my £5 ebay filter for this £45 performance filter... it arrived today in less than 24hours ordered! great service, so before fitting id thought id do some logs...

Just wanted to see what people were using to hold their air filters in place. I have the usual set up with a conical filter.

Is anyone using the Jetex cone filter on there LCR's? and what size neck are you using?

I have decided to go down the jetex filter route with a 45 degree samco hose. could someone tell what size cone and what diameter hose i will need for best results

Hey Guys right all my stuff came this morning Filter, silicon elbow and alloy joiner. Just a quick question does the silicon pipe need cutting down? Any any other things I should know of? or is it just a case of take old filter box out Cheers

Just thought I'd post some pics of my Leon Cupra R. Not much different from any other LCR but there you go. Bought the car in totally standard trim and carried out all of the mods myself. Thanks for having a quick look and any comments are welcome. So far we have; (Below list will be...