k03

Hi everyone I have had this issue since taking owner ship of the car when it was stock now stage 1 I have changed every service item plugs coil filters dv n75 etc I have experienced this odd boost problem has gotten worse since mapped as more obviously boost. so 3rd gear or above you floor...

Hi all, I read on another site that all K03 turbos (not S) have a yellow id plate attached to them, is this true? Had a little seachy but couldn't fid any info on this. Thanks

Just a quicky... Im going to be running this intercooler and running new pipe with with it. Just want to know from anyone who is running the lcr intercooler pipe work if they noticed increased turbo lag over the standard ibiza setup due to the longer run of intercooler piping...

Daft question I know but I've got a 53 plate 225 lcr.....what turbo do I have?

Hi Guys. Been searching on the forums and found lots and lots about CAI for the cupra K04 but hardly anything useful about the FR K03.... Can CAI's be bought for the FR and where abouts in the engine bay is the turbo because ive been told its in a completely different position to the cupra...

Sorry lads, another :confused:member here. I have bought a turbo from an audi TT (ARY) what looks like a k03s to me as it looks like the same as whats on my Anniversary Golf (AUQ). but this one in question is a recon cos the i.d plate is blank and the exterior looks almost like new But...

I know this is a odd question but does anyone now what Size and thread a K03 Banjo bolt is for a Oil feed line.. Reason Being as im using 2 x K03 Banjo bolts on my IHI vf23 turbo for the coolant feeds and ive some how stripped the thread from inside the turbo... Ive taken the turbo off and...

Engine Brand new K03s from Turbo Dynamics Revo Stage 2 Blueflmae downpipe and decat Miltek Cat back exhaust with centre silencer removed G60 flywheel and VR6 clutch Jetex FR-07008 Filter Universal intercooler painted gloss black Custom charge pipe painted black with blue silicone hoses...

hi guys as some of you no ive changed my mined to go hybrid just geting all my parts together and then sending my spare turbo off what i had off tommycupra for the treatment lol just wanted to no what power people where geting of these kind of turbos any graphs or information would be helpfull...

I am currently pricing up a full exhaust system for my cupra. I have been looking at manifolds and stumbled across this one...

Maybe a silly question but would it be ok to run about in an un-mappped car for a while until i do get it done...? poss set boost with manual boost controller or something? Thanks Kenny

Peeps, I have a spare K03 sitting in a box waiting for something to happen. Now, instead of awaiting the worst I'm wondering If I can put this to good use. I'm guessing that its a pretty poor starting point to hybrid and probably wouldn't be worth it but thought I would ask...

200ps K03 TFSI engine not KO4!! I already have stage 2 bluefin on my car. Plus i have the autotech fuel pump internals still to fit to my HPFP. im going stage 2+ as soon as i have the internals fitted, but my question is does anyone have Dyno printouts or accurate realistic HP and torque...

Just wanted to know what remap do you have and how many mbar/Bar/psi does the car peak at. (with logs if you have) ko3 only owners with some stage one mods Just want to compare as mines only boost around 1860mbar (requested) and drops down. On my leon (early model- k03 - engine app) it boost at...

Hi all, i have been searching and cant really find nothing. i have a stage 1 jabba remap, forge fmic, bf cat back exhaust, forge tip n so on... my boost on my mk3 ibiza drops to about 6 psi in 1st, 2nd and 3rd but holds at bout 14 psi in 4th n 5th. it peaks at nearly 20 psi. is this normal on...

hiya everyone i was just looking around about abit more info on the turbo and and few other mods i know the cr turbos do the turbo but i just found this and i wanted to know if it was exactally the same as what the cr turbo do http://www.gpopshop.com/kkkturbos.html honest on the turbo...

ive just brought a 04 leon cupra and have been looking into what stages there are stage one looks like 200ish bhp with a remap but i was looking at 220-230 bhp with is stage 2 yess??? fmic, k03s turbo, induction kit, and exhaust do i need anything else???? how much should it cost to get to...

I have now done all the mods to my car for stage 2... i think. DV, Induction kit, FMIC, TIP, 3" turbo back exhaust. (decat) I am now planning on stage 2 custom code, But if i can source a decent priced k03s i would put it on first. Is it worth going k03s? Is there anything else i need...

Im new to this site and want bit of info on mk3 ibiza want bit more power so thinking of adding a turbo ive read up on k03s and k04 could someone point me in right direction of which one to get and what donor cars i can get them from? is k04 straight bolt on? which is better etc?

aup lads am after some info if anyone could help i am looking at going hybrid very soon and want to keep costs down as ive just bought a house lol so i wana no if i could run a hybrid k03 on revo stage 2 which is what i have now on a k03s i will have access to lemmiwinks via danny-lad so i can...