low

  1. Leon 1.8 20VT 2004 42K Km (26K mi)

    Hi all, I'm new in the forum and looking for your expert advice. I'm in the market for a MK1 Leon 1.8T Obviously my first choice is a CupraR but on my search I found this: 2004 Leon 1.8 20VT 180 PS with only 42,000 Km (26,200 mi) My concern is that if we do the math, it only had run 250...
  2. Purplecupra2

    Nice to meet you all. Instagram: purplecupra

    This is my purple seat leon cupra 290. I got it on the 30th August this year. Instagram: purplecupra
  3. nick9one1

    how low is this?

    I've just changed my alloys for some Cupra Starfish and it sits even lower to the road than on the 18's in the picture. any idea how low it is? I want to get some higher springs but I don't want to go buy a set of 35's and find out its exactly the same.
  4. mazzerati

    Super low!

    Anyone got an Ibiza on air ride around here? It's low now but I still want lower :). (I am aware I'm daft for wanting lower) need an idea on price and recommendations for places to fit them! Thanks in advance!
  5. garry01

    what arb to buy on low leon? tdi model

    have the usual problems as you all know when dropping your leon with the arb rubbing on the drive shaft so have decided an uprated arb is now in need, already have shortened drop links before you ask, just want that extra bit of clearance. my question is what anti roll bars do you have on...
  6. odd-head

    how low can toledos go???

    hello just been looking at suspension kits for my car and come across this on the Spax adjustable kit Notes: (17) At over 45mm lowering at the front, a modified anti roll bar is required to prevent fouling. Struts will not fit cars with the anti roll bar link attached to the strut. is...
  7. rod the sod

    LOW torque??!!

    Hey i am just wondering if anyone knows why my torque figure is lower than expected! i had a custom map with RStuning and had 360 lbft of torque about a month ago (on a pd130 hydrid) and when i got on the RR last weekend it only managed 288lbft?? the break horse power was pretty much bang on for...
  8. How low can I go?

    Well ive just got a nice shiney new set of rs6 v2 replicas, that are 17 x 7.5 with 205, 45's on and was wondering how low to go without getting too much scrubbing? Ive been getting a couple of little scrubs with standard height.......also im a machinist by trade and just made some 20mm...
  9. t0m

    Essentials to going low on LCR?

    Hi guys n gals Can someone please give me a list of all the essentials I need to go low on 35mm coilovers? As in ARBs etc? Anything else required? Or to look out for? Done a search but want a definitive list so I can budget for everything :) Any links and prices appreciated. I'm a lowering...
  10. wenman

    How low are you?

    Just wondering how much everyone has lowered their cars. Hopefully getting some coilovers tonight and would like to drop my car to the floor! Any known problems like CV joints going or needing to notch the chassis on the Ibiza's etc?
  11. WeeG

    Car stalling - low oil?

    I'll give you the low down guys, after work today started my car, everrything was fine, i pulled out and as i started to move it just stalled, i never noticed until i tried to put the foot down a tiny bit more in the car park nothing! thought dam stalled it! Went to start it, it tried to turn...
  12. BoomhaueR

    Why does my blueflame hang so low?

    The top of the tip of my new blueflame exhaust hangs a good 3" below the recess in the bumper, and is off to left side by about 0.5". The mechanic who fitted it said he couldn't bend the rear mounting point up any further without the sort of 'U-bend' bit behind the rear box that goes over a...
  13. oneofthetwins

    How Low?

    Hello all, Iam looking for coilovers or suspension for the mk4. Its got skoda vrs wheels on it at the moment and i think the cars lowered about 20mm just now but i want it allot lower so people with skoda vrs wheels please help and tell me how low you can actually go without rubbing the...
  14. DaveysFR

    Rolling Road Results Seem a little low maybe?

    Hi guys, had my Cupra RR'd yesterday and it made 279bhp and 301lb/ft of torque, is this a bit low for a Stage 1 Bluefin map and an EVOMS intake?
  15. DaveysFR

    Bi Xenon Dipped Beam very low since lowering

    Hi guys, I lowered my Cupra on Eibach Sportlines before christmas and since then the AFS system in the Bi-Xenons seem to be very low on Dipped beam. I replaced the sensors on the front passenger hub and rear arm in the position they were in prior to lowering the car. Just wondering can...
  16. greesha

    very low mpg + knocking sound - please help :)

    Hello, Since i bought my car i have constant problems with very low mpg. I do realize its probably my fault but i would like to take everything else out of equation. In last 6 month i have changed thermostat, CTS, spark plugs and MAF. I've cleaned my throttle body. Still no improvement. From...
  17. Cupra TDI White Smoke @ low revs

    My Ibiza Cupra seems to bellow out white smoke when on a light throttle (say at 30mph in 3/4). It doesn't seem to smoke at any other time. Any ideas what this could be? thanks for any help!
  18. oil light flashing and beep 3 times , low oil presure ??

    my oil light flashes and it beeps 3 times , im prety sure its low oil presure . what causes low oil presure ?? do i need to get a new oil pump , or should i try servicing it first oil and filter ect . ?? :confused:
  19. ChrisGTL

    Low revs after driving on tickover?

    My car has started doing this all the time now onn the way to work in a morning. Because the roads are jam packed I often drive (well crawl) in 1st using tickover to drive along a busy road I join. Then when the car brakes in front of me and I dip my clutch my revs drop below its usual idle...
  20. Dan_T

    how low to go???

    hi guys im new to this so be kind. im driving a 1.4 reference and was woundering how low i could go ive beem looking at some Eibach Pro Springs on fleebay. If any1 has picks off some low ibiza's please post. Cheers Dan:bleh:
SEATCUPRA.NET Forum merchandise