milltek

My KO4 Octavia has a 2.75" downpipe fitted, would there be much benefit upgrading to a 3"? Or is it a waste of time. Bear in mind mine gave same RR result as a ED30 with Stage 2+ on the same RR

Any reason why a Milltek exhaust system for a Cupra or petrol FR won't fit a FR TDI? Thanks, Danny.

right basically iv bought a milltek downpipe to fit to my tdi 130, i cant afford the rest of the system right now but i am looking to fit the downpipe and fit the rest after. what i was wanting to know is the standard size of the exhaust 2.25" as i wil need a reducer from the milltek 2.5 inch...

Has anyone fitted a milltek cat back on there own driveway ? is the old system easy to get off? I don't think i can wait until monday ! Thanks sTeve

For an FR 150. I can find the exhaust for sale just not the FMIC :( any idea where i can get one or if the 1.8T one will fit? Thanks.

ive had a rite carry on getting a new milltek back box of Awesome gti because of a stock misunderstanding or something and was wondering if any off the cat backs i mentioned would mate up with the Milltek because ive heard there a rite fart on and have to make adaptors up and what not. any help...

Im fed up my back box has cracked where the exhaust hanger meets the backbox itself for the 2nd time!ive already had one on warranty but the dealer i got the original and the replacement from has now gone out of business and closed! [:@][:@][:@] What do i do?ive emailed milltek to see what...

Can someone confirm the following advice that I received today from Milltek. I was enquiring about a Cat-back Resonated for my K1 and they said that the Resonated was designed for the Sports Cat and without it it would be quieter than my stock pipe and that I should go for the non-resonated...

i am looking at getting a full milltek oval exhaust. does anyone hace any pics or does it look the seem as the standed one?

Cheeky little trip to AMD today for the 80k service and a new Milltek downpipe kinda fell onto the floor, bounced and knocked the old oem one off the car, then somehow wedged itself into the gap, knocking a new Pipercross into the airbox on its way. Ooops! (The Mrs didn't believe me either but...

I'm sure this has been covered a million times, but I've not found it on searching.. Can you rate the noises, if you've been in, owned or heard drive by, the noise in terms of volume out of 10 for the standard system, and cat back res and non-res. I'm only considering a cat back for now...

ok, so a tuning company in northern ireland which ive used on past cars and got my milltek cat back from and fitted by last week gave me a few power quotes for mapping my fr. i've got bluefin at the minute, and thy were saying how they're maps are better than superchips, etc and that they've had...

Hello i have just put a K&N filter on my LCR and i couldnt be happier with the sound its really loud espesially the dump valve, however the next step is the full exhaust system. I have been recomended the Milltek non resonated Cat Back system for around £340 I want it to be loud really...

hi guys i just fitted my new milltek non res and i gone from 11 psi on boost to 16psi then tail back to 9 ish should it be doin this??? anyone had same problam:confused:

Evenin'! After fighting with a tight fit for my Milltek exhaust, I ended up unbolting that thin piece of metal running across the middle of the car underneath. Since it's not very sturdy I ASSUME it's not needed to add to the rigidity of the car? It's just there to catch the exhaust in case...

Hey guys, sorry to continue this on as i started another thread relating to this a few weeks ago. I ordered a catback system for my remapped ibiza fr tdi. Unfortunatly with going on holiday the week before i had to cancel it due to funds. I am now toying with the idea of a turbo back millteck...

k1 milltek turbo back ext? has any one put a full system sport cat/cat back on the tfsi? what sort of gains should i expect? allready mapped 280bhp???

Bought a MIlltek downpipe and sports cat from another forum member to fit to my existing milltek cat back. However the connecting pipe that came with the DP won't fit into the sleeve of the non-res section I have as the connecting pipe diameter is too big. The p/n's are all correct...

Sorry if this has been asked before thinking of getting the milltek system but not sure how it will sound on my tdi, heard exhausts on a few diesels like 306's and they sound shocking don't really want the same result for my car, any answers on how it would sound would be great. thanks mitch...

Hi...WTF, have just been informed that as I have just invested in a pricey turbo back Milltek system, I can no longer go to stage 2 as I need a 3 inch downpipe, which can't be mated to the Milltek cat. Surely this can't be correct or Milltek would have gone bust with having to keep the...