missing

I went to fit my Neuspeed rear ARB today and is it me being thick and not installing it right or is it way too wide? I can't for the life of me get this to line up. I have the other side set like this... And the bush is sitting nice and flat on the axle so I am pretty sure it's...

my ibiza cupra didnt come with a cd player/changer. what price do they go for and where can i pick one up? Cheers, Dimple

Hey All, When i first got my LCR i got it mapped and it churned out 269bhp/308lb/ft, that was running 98ron with a K&N panel filter and a Samco TIP, thats it. Since then i have added the below. Jetex cone filter. Heat Shield Dv007p FMIC BlueFlame Cat back I have added other bit...

When changing my alloys today, i took the centre caps off the FR alloys to find a wheel bolt missing. How safe is it to drive around on only 4 of the 5 wheel bolts. Looks like the threads knackered hence why a bolt wasnt put back in. Looks like i need a new rear hub. Ive done 7,000 miles since...

Hi, I've got a puncture and cant find the locking nut. How can I get a replacement from SEAT without driving down there as the car is stuck on the drive? Cheers Dan

Picked up my car from a garage this week. On the engineers report he noted that I had no spigot rings on the front wheels, and advised me not to drive the car until they were replaced. Took off my front wheels this morning and found the following on both sides: Correct me if im...

hi i sent my car for a bumper fitting and a bump taking out the rear quarter nealry 4 week ago and all spraying this was finished like 2 week back but the bumper came with no brackets and this is why it is taking so long everytime i call he has a new excuse why he still hasnt found the brackets...

As title says i got home tonight to find my passenger front tyre had a massive hole in it, i came to take the locking wheel nut off but found i had missplaced the locking wheel nut. Has anyone had any experiance on how to remove the locking wheel. Any help would be really welcomed.

my seat leon 20v turbo when starting from cold it miss fires any ideas guys?

Only got rid of my old ibiza in february! swapped it for a mk2 golf gti 16v cos I really wanted to be back in a mk2 golf, problem now is i'm really missing the boxy arches and abf!! weird how the grass seems greener on the other side eh? anybody fancy swapping their ibiza valver for me golf then:p

Hi, Can anyone help please!! i have a seat ibiza cupra 2.0 16v on a T plate and its just started to miss underload put my foot down in 2nd 3rd or 4th and it just starts spluttering around 3000rpm!! i have done the usual plugs, filter, clean the throttle body the last thing i can think of is the...

Last night i went for a drive in my car and since my ds2500 pads are nicely bedded in, i did a lot of hard braking to try them out, got to a point where the brakes were smoking, so i went to the nearest garage and took a look. On the passanger left side i saw this in the brake disc, picture down...

Hi Everyone, I've just bought a 1.9TDI Toledo 2004 105bhp (BKC engine / new shape), the car seems to misfire at about 1700rpm. Most of the time it's a very slight vibration/shudder when running up the gears through 1700rpm to 2000rpm after which it clears itself and runs smoothly. Although...

Hi all, again I done a search but could'nt find anything usefull.The previous owner of my leon cupra took the rear badges off and some laquer too,but left a load of glue on.I've tried tar and glue remover,boiling water and nail varnish remover,all have failed to remove any of it. This stuff is...

I have question, is it possible that cupra bumper and blocked smic can cause big power loss,cause my car is remapped at 135hp, and dyno shows 120hp at 3500rpm not 4000rpm. And after 3500rpm power drops quickly. Is heat and small smic problem that my car is missing 15hp. Seat sport fmic will be...

as the title says, i think im missing a piece off my original airbox :shrug: at the min i dont have a pic but i can explain here goes.... :blink: from the airbox at the box you have a cold air feed pipe. looks a bit like a banana shape that goes round the side of the battery and is held in...

Hi, As i was driving home tonight, my car lost power and was missing and running like a pig! Plugged into vagcom and it came up with missfire on cylinder 2. I immideately thought coilpack, so to be sure, i swapped the coilpack on cylinder 1 with cylinder 2 to see if the fault changed...

Hi everyone! i'm looking for a part no if possible. I dont know what these parts are called As i hightlighted its the blanking plate for the fogs if they were fitted (black grooved piece) and the little facia to its right. mine seem to have both gone missing! how i dont know!! are they...

Oh FFS!! I'm just about at the end of my tether with dealers. So, the CD player and aircon got fixed after waiting about a million months for the parts. In doing so they manage to knacker the wiper alignment which I dropped it in for this morning. The banana fingured buffons managed to cross...

i have neuspeed arbs for the front and rear of my car ive been looking at the fitting guide and i have no bar clamps that hold the bushes in place are they supposed to come with this kit as if so i havent got them and if they are does anyone have paperwork with the part numbers on, as i need these.