needed

  1. advice needed on gauge pillar purchase???

    hi i have been thinking of getting a boost and oil temp gauge fitted to my LCR mk1, but the pods on ebay look crap. does anyone know where i can buy a decent pod for a reasonable price??? regards bash
  2. Car pics - SEAT Ibiza Mk3 views needed what mods etc

    well i bought this about a month ago, have had alot of trouble with it i only paid £600.00 for it and only needed a few pieces doin, so we sed anyway it needed 3 new tyres, front nearside lower wishbone bushes, front break pads, two new side repeater covers, break light sensor switch < still...
  3. New alloy wheel needed due to the weather

    Can anyone help: I slid across the road today in the back streets, due to the weather and i had no steering and this caused me to hit the kerb, on the downside i scuffed the front drivers side alloy wheel. It looks a mess can anyone tell me how much it would cost for a single new alloy and...
  4. KatCowie

    Opinions needed on colour of cone?

    Im looking into getting an open cone for my LC, but don't know which colour would look good. My cupra is red. Any suggestions? I know the MAF is 70mm, but not sure what size cone I would need. Would like something like this, but would have rather had it in red, not blue. FC-07003...
  5. andreww

    40K Service on 20VT ~ what is needed?

    Does anyone know what should be done/changed at the 40K service? My FR 20VT had the cambelt/pump/aux belt done at just over 4 years old ~32k miles. It's now coming up on 40K. I assume it's just oil, filter, pollen filter, gearbox oil? Cheers.
  6. AlexGSi2000

    Tie rod ends - advice needed

    Just a quick one, the cupras going into the garage on Tuesday to have its wishbones, balljoints and tie rod ends done. I ordered the tie rod ends from euro car parts: Right side...
  7. MadsenTDi

    xenon ballasters part number?

    Hello and happy new year on the board :D I just got my new BI-xenon lights for the leon, but i can see that the xenon ballasters are missing :cry: Does anybody have the part number for those ballasters, and dosnt mind sharing? TIA -Lars
  8. ((Urgent help needed)) seat coradoba wont start

    seat cordoba 2000 w reg petrol 1.4 8vHi guys my Car will not start and i have tried everything i no , so i thought i would ask for your knollege. All the plugs are sparking , fuel seems to be getting their fine and no engine managment lights are on. I have even took the air box off and ran...
  9. DKershaw

    Rear washer not working

    Hi my front washers are working but my back one is not. I have checked the boot and it is not wet at all so is there any other stuff i can check to see if the hose has popped off any where else..........thanks in advance Danny :blink:
  10. Gordz

    Lighter Socket Help Needed Please! (No it's not the fuse!!!)

    Searched and searched and searched and searched.... and just for a change I did a bit more searching... and found nothing about my odd problem (with the leon that is!), anyway... The cigarette lighter socket has out of the blue stopped working. Before anyone says, no it's not the fuse as I...
  11. cupra cooling system pressurising up. help needed

    right. i recently changed the thermostat in my car as it took quite a while to get up to temperature and when it did it wouldnt keep constant.ever since i fitted the new one the cooling system has been pressurising up.so i decided to buy another one from seat as i thought the one i brought might...
  12. aterro

    advice needed on turbo and map

    hello how is everyone? right i dont want a big spec only a small ish spec. ive been looking at just a stage 1 map for the cupra by revo but im now thinking about a k03s hybrid but i didnt realy want to spend alot what other parts would i need with the k03s? is it pretty...
  13. Limited slip diff needed in Leon FR???

    Hey everyone, I'm looking at getting my ecu re mapped and having the dpf removed as well as the full exhaust done. :D One thing I have thought of was with all that extra power; wouldn't it be wasted with an open diff?? :cry: I've looked everywhere and can't seem to find proof that the FR...
  14. Temperature goes to 120!!! HELP NEEDED ASAP

    While driving my car today(2003 Leon Cupra) i noticed the temperature gauge rising up past the 90 mark and it rose to 120 with a red flashing light and a beeping noise.i stopped the car and checked it over as best i could, signs of fluid leak, checked all fluids etc, but nothing.i rang my local...
  15. icestorm81

    New brake discs needed

    Does anyone know if the brembo groved discs are any good with ds2500 pads, as i found some on ebay for 200 pounds which include 2 up front, and 2 for the back...
  16. Nef

    Advice needed, High Milage LC

    Bought my 2002 LC near the start of the year on about 90k, As usual i wasnt going to look around and ended up buying the first one i went to see. Didnt bother me at all as it was in very good condition anyway. Anyways its now coming up to 105k, has a full service history, a few mods, and so...
  17. Expert Help needed - Paintwork damage

    Hi guys, Looking for some real expert advice or at least someone who knows a bit about paintwork on the next course of action. Last week the car was vandalised probably by a ball bearing smashing two windows. I would have been less pissed off except one of the pellet's dented the paintwork...
  18. JamesE

    light on the dash keeps flashing but its now on constantly. Is it the pilot light?

    Hi guys, i got a problem with my cupra, a light on the dash keeps flashing but its now on constantly. The light is the one in the middle on the right i think its the pilot light?? the car also sounds like it does when a coilpack goes but that light doesnt come on when a coilpack goes does...
  19. Nef

    Coil packs, which one? Help needed.

    Just wondering which coil pack will fit my mk1 leon, a mate on mine works for VW. Would a mk 4 golf one fit, if so anyone have a part number
  20. BCM

    Coil pack part number needed quickly

    I need a Coil Pack asap and the VW garage can only search by part numbers, anyone got the part number for a Cupra R 210, its not the volt down ones. Looked but cant find a straight answer.
SEATCUPRA.NET Forum merchandise