pd160

vibratechnics dogbone removed from my ibiza tdi sport, will also fit fabia vrs, polo pd130 etc, £60 postage available at cost Located bathgate

Hi Folks, Bought an Ibiza PD160 back in Feb, great wee car which i got for a good price because it had a few faults of which one (Power Steering fail) i got fixed thanks to the great info from this forum. However i still remain with one issue. When accelerating from low revs say 1500rpm in 2nd...

I've been sourcing parts to revert my Cupra back to standard ride height/suspension and ditching the coilovers. The number of those narrow 'dome' speed bumps appearing my way are making my commute unbearable. Tbh the coilovers were already on the car when I bought it so no major worries in...

Has anyone tried to replace standard FR PD130 plastic pipe with the Cupra metal PD160 charge pipe?? (6LL145770B (egr to smic)) Is it a direct replacement?? Or can anyone recommend a direct fit aftermarket upgrade please! Cheers amigos

Hello, Could you please tell me what I would need to do to turn my Pd100 sport into the PD160 cupra, i.e. power wise not looks. Any advice would be much appreciated. Kev

So I'm due to commence ownership with my first VAG. 07 Cupra Ibiza PD160. I always tell myself, keep the car standard and modify later, but I tend to correct all the things that I believe should have came standard :) Basically I'd like your input on the essential mods for a nice PD160...

before i get attacked.... i have done many searchs and had a look in the faqs about this there is a lot of info on here about people that have done it but i cant find a step-by-step anywhere, i was having a play earlier and could remove the lower part of the standard air box. theres a...

I'm wondering what is causing my mk4 PD160 ibiza cupra to go into limp mode. It tends to happen at low revs in 6th gear. I don't get any errors and have replaced the MAF about 6 moths ago. It has only happened 4 times, but that is in the last few weeks. I've read the forums and people...

worth doing? I've got a standard PD130 Hopefully booked in next month for a Stage 1 remap and panel filter at P-Torque :D

Hey guys. Went for a custom remap at Stealth Racing at the weekend. Met Vince there who is very knowledgeable about all things VAG. Really impressed. Anyway, He put the car on the rollers to check it's all OK before starting the process and it made 291 lb ft. This is the graph I took a pic...

Ok, my cars in for some warranty work, thought it was wheel bearing but turned out to be excessve play in the CV joint, so joint has been changed, and also a cambelt change. However i also noticed as the per the post the other week that my car did'nt have the correct PD160 specific intake...

I had a Remap at P-Torque with the standard 130PD air intake and now I am fitting a PD160 intake pipe and Trumpet, will it make any difference to the power output compared to if I had it fitted before the remap. Also when I had the map done Will said air intake was restrictive, I was surprised...

hi guys and girls, just fitted the seat sport fmic and PD160 intake and now my engine management light and tcs light have come up:( any ideas??

i've noticed that in 2nd gear my car will pull from 2-3,000 RPM very rapidly - needle almost jumps... it was also doing the same between 2,800 and 3,000 in 6th on the motorway is this some kind of overboost kicking in, or have i got a problem somewhere?

and first mod:

Hey guys another post for today as about 2 months ago i done an experiment which many said would show a small gain. My remapped fr tdi, was remapped by angel tuning, advertised at 180+. I went onto by green panel filter and a pd160 air intake. I went to hillington rolling road, where they have a...

Hi Guys, I posted this on the Leon forum but have had no responses and have just realised there is a diesel forum!! Sorry to repost. Just to put you in the picture - I've got a 54 plate Mk 1 Seat Leon PD130 TDi. My mate's got a Skoda Fabia vRS PD130 TDi - he's installed a PD160 air...

Just bought this and wondered what little mods there are to make? Have seen the LCR splitter which I am keen on :)

Ummm all the Beefa boys seem to be fitting PD160 intakes to their PD130's..Can this be done to a Leon PD150 or are they the same? :shrug:

Hey guys.... I have a pd100 ibiza, with a stage 1 remap from p-torque. Ive been offered a PD130 intake from a friend but wasn't sure wether its the PD160 i actually need! Does it matter which i have? :) Cheers:D Evo