project

At 6pm the arosa had its first drive all gears working Clutch adjusted lights working !!!!!! All i need to finish it are 1) Windscreen 2) Roll cage 3) Two front tyres :funk: Thanks m0rk, Stu, And My Grandad !:clap::clap:

Ok here goes my time honoured project. Started with. Now i have Mods so far. RS6 Wheels Stubby Aerial LED sidelights LED Strip Lights Squirrel holding Tax Disk. ICE so far Rocford Fosgate Fanatix 6.5"Comps. Sony 2x 55 wrms Amp JBL 1x 255wrms...

hi a few pics of my car 2006 leon btcc edition 19 " ace alloys 235 khumos l c r splitter h/c grille /zenons s/s sills chrome bits m bobs seatsport graphics/ 170 chip custom install 2x 12 " subs amp etc coming soon- tints lowered suspension and leather re trim and sports exhaust

Part exchanged my saxo for a mint low miler Ibiza cupra with a few plans... the day I collected, met oli of here with his too.. I decided to Buy an engine cover, proffesionally sprayed.. not sure if im keeping or not but its nice an clean.. soon to get a carbon part for...

well i did post up afew weeks ago but it went missing here are a couple of pictures of it from last ngihts meet at bescott, ive had it 3 weeks now and love every second of it. lots of work still to be done be its slowy moving on. specs so far engine- p torquoe remap to 200bhp miltek cat...

Hey, As some of you may well know I have a Leon FR 150 (05) and my first major modification to the car is a complete ICE setup inside including its most important feature, the carputer, an ITX computer system. Im going to use this thread for my project listing all my plans, ideas, choices...

Cleaning the car, and for the first time the engine bay: Jacked it up... AND HOLY **** that IS NOT supposed to fall off!!! wtf, i could have died!! It just fell off!!! I dont believe it! I will be naming and shaming on a local forum. OZ Seat Sport Super T's in black fitted...

As not many people visit the Cordoba section I thought I'd post the link to my pics here :D http://www.seatcupra.net/forums/showpost.php?p=1501314&postcount=202 Pete

Hello all, Finally nearly finished my polo 1.8t conversion, I just need the Exhaust and remap. Here's my spec so far: AYP engine, gearbox & ECU (156hp) K04-23 Turbo & Manifold S3 injectors + MAF (225hp) S3 Fuel pump (225hp) Forge FMIC Forge TIP & Split R D/V 4BAR FPR I am...

this is my new project :funk: im planning to strip the car to the shell and replace all disscoloured broken moldings and window seals ect get all the wheels refurbed, new tyres sort out all the paintwork smooth the rear wiper and badge also have a mental clean inside shampoo the seats and...

i think most of ya saw it when i got it , but heres some progress . the rusty arches have been dealt with : the rusty / chavy rear end has been sorted : and the wheels were in such a bad way :( need a proper refurb , but gotta keep to my budget till its motd , so a lick of...

A friend of mine suggested that we should see about adding a 4Motion all-wheel drive from the R32 Golf to my Cupra. Needless to say my ears perked up and if it is possible I will have it done. Since the Cupra shares the same frame/parts of the Golf Mark V this might just be a bolt-on affair...

Hi everyone, I have laid the 1.4 to rest before giving her a fair go due to an opportunity which came to life earlier this week - james_mk's Copper Cupra turned up. This topic is basically a log of all the work I have done or will be doing to the car. This post will be updated every so...

Well, I decided it was time to get a project car :) After much messing about with another Mk1 I was supposed to be getting, I spotted this baby on Friday, went to see it Saturday, and it arrived on Sunday :D It's a Mars Red 1977 Polo N 895cc baby! It's pretty straight, I beieve it's...

this is my 20v turbo project which i have started and plan to have done by the end of the summer the car The engine the turbo kit for it

Hi all. After sorting alll the mechaical problems out with the car ive decieded to get the car looking as good as it should. Ive decied to take the cupra down the euro route as im bored with the black wheels now. Ive had the rear arches rolled this morning and Ive got the car booked in to a...

Ok, just some teaser shots for you. :qq::qq::qq: This is what the whole MU looks like under halogen lights: and half the bonnet after 2 hours!!!! :flaming::flaming: and once done under halogens: without halogens and nearer to what daylight would enable you to see:

Mods: Air intake Remap on aprox. 185 hp + Bonalume BOV Exhaust system by Sole Larger gas cooler Suspension and brakes: ATE Power brakes Coilovers H&R (Upside-down system) SCC spacers (20mm back and 15mm front) black painted Custom strut brace Full Powerflex kit Exterior...

thought i'd post a couple of pics up of my car and my mates 2.0 16v Gti not much has changed on mine recently but the 16v has got most of my old set up on it and may be getting a 20vt conversion soon :)

Since its now had its badly-needed clutch change work on my project car (MY91 Sierra Xr4x4) is now going to begin in earnest. One of the first tasks is going to be to get the car cleaned up as having been stood variously on peoples drives and in what can only be described as a field for...