quick

Right i know pretty much what HID stuff i need for my LCR what i do need to know is do i need to get ballasts etc for each HID application ie Dipped H7 1x Kit? Full beam H1 1x kit? Fogs 1x H3 kit? or is there some sort of hub which will run them all? i hope that makes sense

Hi there peeps, just wondering if i can t off from the n249 bypass i have done to my lc and connect my boost gauge on to this system?? will it work...... cheers

Hi guys.. I'm getting the following codes regularly after clearing them.. 16804 - Catalyst System: Bank 1: Efficiency Below Threshold P0420 - 35-00 - - 16514 - Oxygen (Lambda) Sensor B1 S1: Malfunction in Circuit P0130 - 35-10 - - - Intermittent I get an occasional...

I have got a Mk1 Leon SE, it was cheap and it wasn't looked after but only done 52,000 miles but it has a few problems and have some quick questions. Please help. What is the buton thats above/ next to the fuel cap one? (Its missing in mine) How do you get the cup holder next to the...

hey, i have got an auto gauge boost gauge from halfords, and just finised fitting it into my drivers side airvent, im clued up on where the electrics go, i just dunno where to connect the T piece too:confused: if anybody could help or even show me a pic of where it has been connected that would...

ano you'll all shout and say search,but it so damm long just a few qiuck q's am looking at getting some 225/45/17 for my tdi sport on standarsd set up they should fit fine no rubbing right? also want to no what about with just collies what about with just spacer eg 20mmm and...

hello! just got my hid kit and only had about 20 mins before i go out so thought id stick to putting in the sidelight led's that came with it. anyway got one side in. works. put the other side in that works but 1st one has gone out, so go to take the drivers side one out again and the bloody led...

will mk2 wheels fit a mk1? ie stud pattern the same???:D

iv just fitted a new splitter r dv and when the valve is fully clockwise it flutters under full boost throttle lift , but when i turn it fully anti clockwise it dose the same thing. forge say that if you get this then the spring is set to tightly but iv had the valve as tight and as loose as it...

Hi all, total newbie here so please forgive the question if the answer is obvious (and yes I have tried searching for the answer already!) I intend to buy a Cupra over the next week or so. On looking at various pictures of potential buys on autotrader I noticed that on the centre console...

(will delete as soon as its sorted so before you whinge about searching etc...) Just had car back from MOT and one advisory (one of many) was that my front arb (standard) D bushes are perishing/perished. So they need replacing. found some online (powerflex) and they quote two sizes? does...

hello mates, Quick question as i am fitting mine as we speak ive got a gauge with 4 wires 1x black 1x white 1x orange 1x red Am i right in thinking black- brown orange and white- grey Red - Red Many thanks Mark

Hi, I'm still a newbie to turbos etc and still trying to get my head around it all. I've been looking up on intercoolers and the FMIC is quite abit out of budget for me. Been looking at universal intercoolers for the mk3 and they dont come with hoses etc. Where can I get the hoses from...

FRONT BRAKES: Edit: Right I fitted the brakes, disks and pads earlier, and it seems the brakes may be stuck on. Took it for a little drive and they were smoking. The passenger side was the worst. Any suggestions as to what it may be, and how to resolve it? Thanks Speaking to a mate...

So its sunday and i feel i should be doing sumthing to the Leon... I need sum mods to do that involve little or no parts (I do have a garrage full of stuff though so try me!) Any ideas what i can do to satisfy my need to play ? cheers guys

new question: how many newtonmeter to use when fastening the downpipe to the turbo ? im about to change my downpipe with a 3" 42 Draft Designs downpipe with magnaflow sportcat and have some quick questions should the nuts and washers on the turboflange be replaced?

Just quick question, how many types of black colours are there? for mk3 ibiza inc cupra?

Well having tried the following filters on my car i thought id post a thread about the best ones: Tried a: K&N 57i BMC CDA 85 - 150 ITG Open filter JC60 - 80 The K&N was fairly old, but performance felt fairly restricted, and so i opted to fit my BMC CDA. This felt totally different...

Hey folks, I know the cambelt should be changed at 60k. However, is it 60k or 5yrs, whichever comes first? Basically - If you owned an 03 plate Leon with 35k on the clock - would you change the cambelt? This mileage seems quite low to worry, but I think there is usually an age limit too...

HI, My new Ibiza (due next week) has been built with the IPOD kit fitted. I know the adaptor cable plugs into the USB socket, and also a 3.5mm headphone jack plugs into an aux socket. Can anyone tell me if the aux socket is fitted next to the USB on cars with the IPOD kit factory fitted? (It...