ratio

as above, im currently doing a project on my seat ibiza FR tdi pd130, its 2006 facelift model. if anyone could please tell me the gear ratios for the vehicle and the final drive ratio? ino the ibiza and fabia VRS have the same engine but i cant find either for ratios any help would be...

Are there any differences between steering ratios on Cupra and non Cupra models? I want to upgrade my steering ratio to be more sporty and dont know, if there is any OEM opportunity. I know there are some sport steering ratios for amateur rally cars, but its hard to get them and its not so...

Are the gearbox's the same in a Leon cupra R and the Cupra? Are the ratio's the same?

it is a good thing to install the ibiza cupra Tdi 6speed gear on the 1.8T engine with a big turbo setup ??

to make life a little simpler and easier there's a cute little Excel spreadsheet link here that will take into consideration your tyre size so a useful tool for modded cars etc http://www.gearboxman.co.uk/download/gearspeeds.v2.xls free download and fills in a handy graph too Etka +...

hey there!!!! I've been searching on the web for specific details, but I cant find any. I need to know my cars compression ratio? (it is a Toledo 2002, N/A 1.8L AGN engine) and I need to know what is the average pressure I should obtain from my engine, when running a compression test...

i got a air fuel ratio gauge and want to know how it is wired in i know its one cable to the o2 sensor, can some tell me where the o2 sensor is and what color cable i should use? thanks

I have been looking into the compression ratio of the 20VT engine. The book says that the 20VT has a ratio of 9.5 to 1 where as the 20V N/A engine with 124ps has a ratio of 10.3 to 1. I was expecting the turbo engine to have a much lower compression ratio, can anyone explain why the ratio is...

Just been playing with the ross tech A/F ratio calculator, I was just wondering what the results should be for our cars to be running pretty much spot on? Heres my results, bearing in mind that im running a 4bar FPR RPM Load % A/F ratio 3000 119.5 17.75 3120 164.7 16.53 3160 186.5...

Have any of you guys with LCR's came across a problem with the air fuel ratio while on the rolling road ?, a couple of us had LCR's on the rollers and both were running slightly lean and the tester has seen this many times before, but only with LCR's?, this resulted in them only doing one run as...

hello, i would like to ask you something.is it possible to read A/F with vag-com ? i have 1998 audi a3 1.8T (AGU engine code).widebands are really expensive so maybe i can do it with vag-com thank you

I've had a bit of a trawl around with the Search button, but couldn't find any specific info relating to the above... So my question is can anyone tell me what the STD compression ratio is on an LC. No specific reason behind the question, I just wanna know...so I know :whistle: Cheers...

Can anyone tell me what the individual gear ratios are for the 6 speed 02M 1.8t 20v Leon Cupra/Leon Cupra R gearbox. The final drive ratio would also be very useful too!! Cheers:)

Iam stuggling to decide which pistons to go for and what compression i will need/suit the engine best? Iam staying STD bore. The options i have are: Wiseco Pistons @ 9.25:1 JE pistons @ 8.5:1 Whats best? iam going GT2871R kit with...

I have done a log using 002 and put the information into a template from rosstech. Im seeing values up to 17 as shown below, should I be worried? RPM Load % A/F ratio 1880 49.6 14.11 1960 56.4 15.32 2040 73.7 16.62 2080 75.2 17.87 2160 62.4 14.23 2240 54.9 14.32 2280 55.6 14.74 2360...

When calculating the Pr for reading compressor maps should you use your peak boost or the boost that your turbo holds? I.e - I peak at 20psi, but hold 16..... Thanks Raf PS also anyone know the volumetric efficiency of the 1.8T lump?

is their a way of logging air/fuel mixture in vagcom to see if the cars running lean/rich? Thanks

I final got all my gauges through the post from the US, IMPORT TAX FREE again!! Can anyone give me some advise as to how to fit my gauge ie which probe to tie into and where abouts to tie into the car. It's an Autometer gauge. cheers