remap

  1. Probs after remap

    Hi peeps, I had my Leon Cupra tdi 150 remapped about a year ago but lately I'm having a problem. When I accelerate the revs seem to shoot up but the speed doesn't, it only does it fora couple of seconds, then the revs drop and the car accelerates normally again. It used to only do it once the...
  2. James_LCR

    Revo Remap and Rolling Road - Heat Soak?

    Evening all, I had my car on the rolling road day today, and it saw 223.5 BHP with 209 lbf-ft as standard. I then had my car remapped (Revo Stage 1). After, we then put it back on the rollers and taken it for a spin with vag-com making sure the boost and timing etc was all correct, which...
  3. Can I Remap the Stock ECU? Seat Leon FR

    i want to remap my leon fr, first i want to know if i can do it with my own ecu with a chip i have been honda owner always and i have no idea what i have to do with my leon fr to tune im thinking to make FMIC, hallman boost controller and change the turbocharger but i need to know how to...
  4. AMD or Revo Re-map

    I have booked in for some upgrades, Milltek Cat Back, 007p and Pipercross Panel Filter. I was going for a stage 1 AMD re-map but with the upgrades they will go straight to stage 2. I met a cupra owner there and he had a revo re-map done and now I am unsure which to get. ANY ADVICE?
  5. McCann87

    In Two Minds Over A Remap

    Not sure whether to get this done or not :think: Would like it doing for the extra power etc. :funk: But then i start thinking against it incase, knowing my luck, the clutch will go :cry: Also im from Middlesbrough... so does anyone know of a decent, reliable place up here that does...
  6. Getting remap nxt saturday

    Hi all, the day is finally upon me MY REMAP IS BOOKED WOOOHOOO!!!! I'm going to total vag on the 6th March to have my remap by custom code. you may ask why custom code? :think: it's quite simple for me as I'm getting a remap for more torque and bhp and custom code offer exactly that, I'm...
  7. Easty

    FR Remap Question !

    I pick up my new Leon FR TDI on May 1st, and it will be getting the dealer remap before I pick it up. In the past i've run the Green Cotton Air Filters on previous cars, but have never had a remap done on any of them. Is there anything else you can recommend through your experience of this...
  8. Full Milltek or Re-map and part Milltek

    I am thinking of taking my car to AMD after 2 years and finally getting some mods done. I want upgarde to a forge 007p and air filter but don't have the funds for a full Milltek exhaust and a stage 1 re-map. So was think of getting a re-map and the back box only. Any advice as to what you would...
  9. what to do superchips 0r remap ?

    Hi all i curently have a 55 plate fr pd tdi130 im in the devon area and thinking of taking my car to alan jeffey's im looking for about 180 200 bhp or am i asking for too much any ideas let me no thanks regards adam
  10. remap question????

    when you remap a petrol fr what mpg increase/decrease will you see?
  11. auq

    Jabba Stage 2 Remap?

    Hi im a newbie to the forums!, i own a 2001 LC with AUQ engine fitted, i belive the engine has the K03s turbo fitted too, ive added a samco TIP, Forge Type R DV, N249 bypass, Cold air feed pipe, ive aquired a ECU from another car with the AUQ engine, it has the Jabba stage 2 remap software on...
  12. turning remap off

    Are you able to turn your remap off using vagcom? Reason i ask is im going to get my 150 remapped but if the clutch starts to slip badly i will turn it off until i can afford a new clutch. And then is it a case of simply turning it back on? also can you do this with any remap? cheers
  13. Remap Company

    Whilst driving home I was following a van that was advertisign ECU remaps Has anyone heard of ECU-RS dot co dot uk Had a look as they do all types of vehicles - Price does not seem too bad
  14. phase 2 remap - is it worth it?

    Hi, iv currently got a custom code phase 1 remap on my Mk4 cupra 20vt and i am thinking about geting a milltek turbo back exhaust and custom code phase 2 remap to go with it. i am wondering is there much difference in terms of accelleration and torque in comparison to the difference between...
  15. Belmont Turbo

    1.6tdi remap? tunerbox?

    hi all just registered on here as im getting an ibiza soon and need some advice im getting a ibiza sc 1.6tdi sport with some extras next month as my new work car.. now my company's gone all eco and thats all i was aloud but i quite like the car but thinking its gonna be a bit slow to what...
  16. Leon Cupra Mk1 Remap Advice

    Please can somebody advise me - I have a 2003 Mk1 Leon Cupra I am looking to remap to 210 or 225bhp I am assuming as I have a 2003 car I'll get the 225bhp a local company called Celtic tuning has offered me this map. some questions/expereices I am trying to find are 1. can somebody...
  17. What do you think it needs, Stage 2 or Stage 3 remap?

    Was just wondering if anyone knows what stage remap i shud be paying for? heres my cars spec at the moment. Seat ibiza cupra Mk3: Bailey dump valve twin mushroom filter Full Scorpian exhuast with sports cat GT2560R turbo not much but was wondering if anybody with more experience could...
  18. RachIbiza

    Got my remap done

    :D got my remap done yesterday by Shark Performance in mansfield - can highly recommend it and the service was great, he dropped us off to the shops whilst he did my car and then picked us up :D some people might like to watch the technical stuff but i would rather shop. The difference is...
  19. oettinger remap

    Brought a leon cupra about 2 weeks ago the garage i brought it of said it had been remapped by oettinger engine conversion. Has any body heard of these
  20. wayne lcr

    remap

    saved enough money for a remap now:D but after reading theads and post about possible clutch problems after a remap. i carnt afford the clutch going wrong and with nearly 70 k on the oem one am i likely to get problems with it any info would be great or advice on whats the best thing to do
Progressive Parts, performance parts and tuning specialists