removal

i have a problem with my ibiza window motor ,i,ve fitted new switches already and when you try to get the window up or down you can hear the relay on the motor clicking on and off .i guess i need a motor.i tried removing it tonight but ended up putting it back together as it looked tricky!anyone...

Hello folks.. My fan blower switch has stopped working on positions 1, 2 and 3...Do i have some failed resistors here?? Thanks in advance folks..

I fitted some LED sidelight bulbs at the weekend and they were great.....up untill today when I turned them on and nothing happened :confused: The rear ones still work and the light comes on the dash but the front sidelights dont come on. I replaced them with the standard bulbs and they...

yello! anyone ever got the cup holder at the top of the center console out? mines stuck in, you can get it out with something thin underneath, when it slides out it seems to be grating on something? is it easy to remove?

hi all i am just wondering if the eml will come on because i have removed the sai pump even though the sai valve is still fitted? cheers

I've looked at the guide in the FAQ's but it doesn't mention how you remove the grab handle cover in order to get the the screws behind it. Dont want to just pull it hard and break it. Can anyone help please??

Real bad luck lately with the car... car died on me the other day just shut down all led to throttle body... replaced and set up still the same... went to my local specailist centre they say the AZD and other engines are prone to burnt valves and seals about 70k causeing back pressures and...

quite simple this one, seen that a few people use trim removal tools, can anyone recomend one and more importantly where they got it from? (a link or two wouldnt go a miss either!) cheers

Apologies if this question has been answered elsewhere! Can anyone tell me how to remove the radio in a 2009 Leon as shown in the photo below? There are no onvious points to use removal keys. I need to fit a Parrot bluetooth unit, so any other hints in relation to that will be appreciatted...

is there a tool for removing the centres on cupra wheels? dont wanan keep using a screwdriver once wheels are refurbed.

Hi, I have just (painfully) removed the armrest from my LCR. Referring to this picture: http://www.cupra.net/Leon/Mein_Cupra/MAL/MAL_13.JPG Look directly at the picture above, the left hole mounted on an existing bolt using a nut, whereas the right two holes seem to mount to the chassis...

is there any guides anywhere on the removal on the n249 valve? whats the benefits to this? any down sides??

I've searched on here, but I still cannot get myself an answer. Basically, my Ibiza is misfiring and I need to remove the engine cover in order to gain access to the spark plugs and coil packs. I've removed the plastic caps above the bolts holding the cover on, but I cannot find the...

Hi guys, Right, I'm thinking of a DPF removal but what are the effects of it? I.E can I tell the DVLA It's gone so technically it's passible for an MOT or what? I don't want it done to find the car won't pass it's MOT in 2 years time also taxing is based on emissions, what to do? :) Danny.

Hi I now have one of these and need to add the following: 1. Power in the boot. This was part of an option that I dont have, I am guessing that the main cabling is in the loom somewhere and hopefully I can buy the bits I need anf fit it without any cable cutting? So anyone work for a...

Ive already searched but theres nothing on my specific question. The bolt holding my pedal box together has sheered so Im in the process of changing the pedal box. Is there ANY way at all to get the pedal box out without disconnecting/removing the steering column/rack?? Thanks.

Me again.. Wipers are stuck at their vertical position, can hear the motor running but not gripping anything until I push the wipers on and it picks up again. I'm assuming a tooth has come off a cog or something inside the motor. I'm looking at replacement motor from Seat (seems to be...

Hi guys, can anybody tell me/show me how to remove the plastic around the handbrake to get to the sensor cable? btw i mean the plastic around the handbrake not the plastic on the handbrake itself to avoid any confusion :) cheers guys ________ Bond insurance forums

Scuse the newbie question, have done a search and the LCR seems to have different pipework to the Cupra, wanted to know where it is and how to get rid please?

Hi all tried searching but cant find anything, Can someone tell me the correct way of removing the mirror covers on my cupra i have the teardrop style, I would attempt but there is a right way i dont want to break them in the process!!???:confused: