splitter

Are any one selling body kits for a Seat Leon FR TSI 130 2018 model?

I decided to carry out some additional styling to my Formentor. I have a new front splitter, rear diffuser, rear spoiler extension and a metal Cupra driver's footrest. All the exterior parts used are in gloss black, although matt (textured) and carbon fibre finishes are available. The front...

Hi all, I've been looking for a nice splitter, sideskirts and roof spoiler for my 2016 Ibiza Cupra. So far the top of my list is: TRC front splitter CSR rear spoiler I've found the original side skirts on eBay, although they are probably replicas...

This guide is for MK3 owners who want to fit an MK1 Leon Cupra R splitter. This guide was done on my CUPRA but it should apply to FRs as well. The splitter should fit other MK3 Leons, but I can't confirm you will get exactly the same fit as the bumper is different. Parts list MK1 Leon Cupra R...

Hello. Did anyone installed this diffuser on Leon FR? It is plug and play (Remove the original and install the new) or need any modifications? Thanks.

Hey, I'm looking at fitting a front splitter and the company I bought it from have suggested the front bumper needs removing to fit the splitter? Does anyone have a general guide on what screws to remove in order to do this on the FR facelift model? I have previously partially removed either...

Hey, I'm looking at fitting a front splitter and the company I bought it from have suggested the front bumper needs removing to fit the splitter? Does anyone have a general guide on what screws to remove in order to do this on the FR facelift model? I have previously partially removed either...

Hi , may of been asked before but I was wondering where I can get a lcr front splitter ? and what needs to be done and what ways is there of fitting one ?

Disclaimer - yes I did search and I'm still confused :) The splitter on my 55-plate LCR 225 is broken (bloody potholes and sleeping policemen) so needs replacing. I can get one from my local stealer and am happy to change it myself. Searched on here and read a bunch of posts about splitters...

as title says need a picture with standard front bumper with LCR splitter (if that is possible to mount) thanks

Hi guys my car is not holding boost which i think its cause the dv spring is to weak, its been like this since the boost was up'd after its stage 1 remap, car is boosting at 1.5bar. Can anyone tell me how many clicks it should be???? I have searched for this answer but nothing i can find...

I have just put a lcr front splitter on my MK2 facelift leon FR. Let me know what you think? Before http://lh4.ggpht.com/_tftiwMUi2LA/S45FeT7Et1I/AAAAAAAAAG8/1SzGDFMQvvo/s640/100_1481.JPG After http://lh4.ggpht.com/_tftiwMUi2LA/S45FphqLn0I/AAAAAAAAAHY/LMuQ6llz84M/s640/100_1482.JPG Jamie

as it says really. If anyone has a pic it would be appretiated. Ta:D

Hi guys, Just picked up my new Splitter just wondered if any one has any photos of when they fitted theres. I have found loads of photos of them fitted !! Wanted to do it the weekend if anyone can help. Just fitted my Fabia rear wiper probably the easiest and cheapest mod i have ever...

Hi everyone,some of you might know me from when i had my Ibiza mk3 Cupra. Just thought i would do another Readers Ride thread now i have my Leon Cupra mk1 Not really much to say,cos its pretty much standered I was told by the last owner it was remapped by Forge and runnin' 205bhp @...

I could some one tell me how to take it off as half is now hanging off due to the load off snow we had over night and trying to bloody drive to work.Will i have to jack car up to get it of.

Has anyone got any pics of a pre face lift mk2 fr leon with a mk1 LCR front splitter fitted ?

Any one know how much an LCR splitter is from Seat???

Hi all. new to the site. just ordered a new Leon Fr in Candy white:funk:. have a few plans for it already and just purchased at Cupra k1 kit. does anyone here know were i can get a front splitter for the car?:help: also anyone with any ideas on how i should modify the car further? any help will...

Hii Just wondering, does anyone know the part number for a cordoba front splitter? I'm not sure if there is more than one, but the ones i've seen and am on about are about 3inches high and have rectangular cut-outs :) Thankyou for any help Chris