updated

Standard with Stage 2 mods fitted it made 235bhp and 219.4lb ft so not bad for a 210! AMD Stage 2 remap it made 270bhp + 319.4lb/ft with Forge TIP ------- Now Running Revo Stage 2 + Badger 5 TIP, Jetex Cone & Jabbasport Heat shield with cold air feed, X4 new coil packs, new thermostat...

For the first time in a while, the wife was in the car, which meant I turned the stereo down, and noticed a funny noise... There's a strange pulsing / rumbling noise which gets faster with the car's speed (not the engine revs). Everything else seems to be working fine and there's no...

Have been a member for several years but have only just managed to get some decent photos loaded on the laptop.Hope you like these pictures they were taken in september.It used to be standard but i got bored.The specs below Engine mods cat back magnex exhaust full samco hose kit Bda...

Hey peeps, Loving my Bocanegra, but one thing i wish I had was the sport brakes. Now I'm regretting not having that, I think the standard brakes are good but not good enough, I need more stopping power. Anyone know the options I have, I would like an upgrade to Brembo's or equivalent but I'd...

Weeeeeeeee.. Should hopefully come this week :P Speed Blue White Wheels (not over keen, but i can change these to black easily) Sat Nav Full Leather Xenons light + rain sensor Front + Rear parking sensor Already got a pre-face lift cupra, so looking forward to the new facelift. PICS ON PAGE...

The biting point on my clutch is right at the top. It actually gets a little higher when the car is warmed up. How high is your??? If this is to high, do you think the master cylinder / slave is on it's way out? (I have used the search, but nothing covers height) I have checked for leaks...

Got a hold of a 5m x 1.2m roll of Gloss Black Vinyl. Plan is to do my roof and the front bumper. Went out tonight to do part of my bumper. Heres some photos of what i have done: Ended up doing my badge with the left over vinyl i had in the garage, i plan on...

Recently I have noticed that my car makes, what I can only discribe as a "darth Vader" breathing sound at low revs. When I am lightly feathering the throttle to pull in to a parking space or my drive it makes this noise. This noise is not from the DV as this make a little woosh when I take my...

finally had my wheels done and she is looking loads better now : just got to have the exhaust sorted then she will be all done for now

Thanks to everyone on here who helped with the original thread a year and half ago :lol: and the thread i had the other day. but the spacers arrived yesterday and after a bit of a mad/busy evening as i had loads to do and the seat wheel bolt bar thing was too big for the holes in the spacers...

Hey Guys n Gals, Been a member on here for a little while but not posted much yet! I thought i might as well start a thread about my car rather than have threads with pics everywhere! First of all- Bought her in March 09 after a nasty incident involving my Decked Polo and a drain...

Hi guys Looking at changing my vacuum hoses before i get my remap and turbosmart dumpvalve and not sure what size i would need to get as ive searched and some say 4mm and some 3mm. So do i need 4mm or 3mm hoses? I found the below on Forge's site would 3metres be enough to change all...

Picked up my new (read second hand), Mk4 Ibiza FR TDI last week, and finally got around to taking some pics today: No mods yet, but having just sold my modded Focus ST, I've got a few plans for the future, probably starting with springs, dampers and spacers to sort out the stance...

Ive bought my Cupra 20vt 180bhp a few weeks ago and im loving it :D I no its not going to stay standard for long so i thought id start a thread and add some pics. My previous car was an Astra coupe which i had for a few years i spent quite a bit of money on it engine conversion (2.0 turbo)...

bought one: MK3 Ibiza Cupra 20vT. already running coils, will be cleaning an lubing em, cant run much lowere out here as exhaust already scrapes. powerflol exhaust - sold on when i can afford a custom/milltek. boost gauge - looks well chavvy, being swapped for an...

Right guys, I need to know the best way to mount and get a cold air feed to my jetex filter in my LCR? Can I see your ideas and ways? I was thinking of getting a enclosed one like the forge one, but I don't think the feed is worth it. The set up on the LCR's I think starves the engine abit, as...

Spotted on my local Seat forecourt on the way to work back in April, within 3 days she was paid for in full with my previous car taken in part exchange, had to wait 2 days to pick her up though which meant some very carefull driving in my old car :lol: So, anyway I started the week with this...

I have had this car for about 6 months now and im loving every minute of driving it still. I am trying to do little bits to it to make it satnd out without making it look stupid if you know what i mean. Here are a few pics of how its changed over the past 6 months. When i first bought the...

Well as you do, I was browsing pistonheads.com out of interest for what price range my car was selling for etc, when something caught my eye which looked different then the rest, and had things I hadn't seen done before on a Cupra. After telling the girlfriend about the car and that I would...

Ran the car the other week at RS Tuning RR day and it only made 186bhp. Now I know there is the old dyno lottery but I was first on at 10am and last time on the same rollers I made 173bhp with out the APR stage 1 and CAT back system. I was expecting around 205-210bhp maybe more if I was lucky...